win2000 dhcp ip config ?

C

Colofalto

1
Hi, I need to change the old domain controller nt4 for a new w2000 server dc, , the ip series is 132.147.100.xxx and the sub 255.255.0.0, wich is the best ip series for m$ network, i have 100 pc

thanks
 
O

Oldy

1
There is not a "best" IP series. Internally you can use pretty much anything you want. Most people use:

10.0.x.x (subnet 255.255.0.0) for class B addresses
or
192.168.0.x (subnet 255.255.255.0) for class C addresses.

If you need more than 250+ addressses (don't forget to include printers, switches, routers, hubs etc when you do your sums) use the Class B address. Less than that number the class C will be fine

These addresses were reserved for this purpose and are non-routable for the Internet.

Oldy
 
W

WeRD

1
Just FYI...the IP series of 172.0.0.x is also reserved for internal networking, although isn't used quite as often as the others.

Later,
WeRD
 
G

gorguts

1
Yes, these are the correct ones.

10.0.0.0 - 10.255.255.255 (10/8 prefix) Class A
172.16.0.0 - 172.31.255.255 (172.16/12 prefix) Class B
192.168.0.0 - 192.168.255.255 (192.168/16 prefix) Class C


What was said above is mostly correct.
 
You must log in or register to reply here.
Top