Hi folks :
I am testing dvd2svcd 1.1.2b1 these few days, it works fine with cce 2.5 & TMPGEnc Plus 2.57.41.
source vobs are StarWar Episode II.
But when I tried to use Canopus ProCoder 1.01.08 as encoder, some error occured.
Canopus ProCoder works, but dvd2svcd halt at bbMPEG section:
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\test\bbMPEG_Muxed_File.mpg"
------- dvd2svcd stop here ----------
and pop up error message : "input file F:\test\Pulldown_Encoded_Video_NTSC.mpv was not found"
and also some message weird "Executing Canopus ProCoder Encoder.
Program Handle not found, terminating program.
"
What's Program Handle ?
The whole log is here :
------------ log begin ------------------------------------------------
WNASPI32.DLL 4.71.2.0
--------------------------------------------------------
- 2003/3/17 ?? 08:40:13
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.2 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:16
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x20 Language: Unspecified
Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 2003/3/17 ?? 08:40:26
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI
Variable settings:
iDCT_Algorithm: 32-bit SSE MMX
Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[F:\test\DVD2AVI_Project_file] -IF=[F:\test\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:40
- Free on drive F: 22434.64 mb
- Extracting the subtitles.
--------------------------------------------------------
Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: Unspecified Num. of subs: 32
Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 2003/3/17 ?? 08:40:50
- Free on drive F: 22433.42 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: F:\test\Extracted_audio_1.ac3
Audio1 delay: -521 ms
Audio extraction finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:56
- Free on drive F: 22426.38 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: F:\test\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "F:\test\Extracted_audio_1.ac3" -output "F:\test\Encoded_audio_1.mp2" -logfile "F:\test\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s surround -g max ) -ota( -d -521 ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of F:\test\Extracted_audio_1.ac3 finished.
Audio conversion finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:42:05
- Free on drive F: 22423.33 mb
- Video Encoding using Canopus ProCoder
--------------------------------------------------------
Executing Frameserver.
Closing program
StreamSectors: 771537788
AudioSectors: 3320996
VideoPAPO: 11900088
ScanOffsetBytes: 2837
SeqAligningBytes: 180294
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 756133568.80
Seconds: 136.46
CalcMPEGStream: 756133568.80
Frames: 3152
CDSize: 740.00
Number of CDs: 1
Cut point 736.00
Executing Canopus ProCoder Encoder.
Program Handle not found, terminating program.
--------------------------------------------------------
- 2003/3/17 ?? 08:56:41
- Free on drive F: 21955.61 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "F:\test\Encoded_Video_TMPGEnc_NTSC.mpv" "F:\test\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:56:50
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:56:57
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:57:03
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:57:09
- Free on drive F: 21955.61 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 736 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\test\bbMPEG_Muxed_File.mpg"
-------------- dvd2svcd halt here ------------------------------------------
so, is there anyone could help me ?
Thanks in advanced !
I am testing dvd2svcd 1.1.2b1 these few days, it works fine with cce 2.5 & TMPGEnc Plus 2.57.41.
source vobs are StarWar Episode II.
But when I tried to use Canopus ProCoder 1.01.08 as encoder, some error occured.
Canopus ProCoder works, but dvd2svcd halt at bbMPEG section:
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\test\bbMPEG_Muxed_File.mpg"
------- dvd2svcd stop here ----------
and pop up error message : "input file F:\test\Pulldown_Encoded_Video_NTSC.mpv was not found"
and also some message weird "Executing Canopus ProCoder Encoder.
Program Handle not found, terminating program.
"
What's Program Handle ?
The whole log is here :
------------ log begin ------------------------------------------------
WNASPI32.DLL 4.71.2.0
--------------------------------------------------------
- 2003/3/17 ?? 08:40:13
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.2 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:16
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x20 Language: Unspecified
Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 2003/3/17 ?? 08:40:26
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI
Variable settings:
iDCT_Algorithm: 32-bit SSE MMX
Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[F:\test\DVD2AVI_Project_file] -IF=[F:\test\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:40
- Free on drive F: 22434.64 mb
- Extracting the subtitles.
--------------------------------------------------------
Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: Unspecified Num. of subs: 32
Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 2003/3/17 ?? 08:40:50
- Free on drive F: 22433.42 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: F:\test\Extracted_audio_1.ac3
Audio1 delay: -521 ms
Audio extraction finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:40:56
- Free on drive F: 22426.38 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: F:\test\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "F:\test\Extracted_audio_1.ac3" -output "F:\test\Encoded_audio_1.mp2" -logfile "F:\test\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s surround -g max ) -ota( -d -521 ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of F:\test\Extracted_audio_1.ac3 finished.
Audio conversion finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:42:05
- Free on drive F: 22423.33 mb
- Video Encoding using Canopus ProCoder
--------------------------------------------------------
Executing Frameserver.
Closing program
StreamSectors: 771537788
AudioSectors: 3320996
VideoPAPO: 11900088
ScanOffsetBytes: 2837
SeqAligningBytes: 180294
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 756133568.80
Seconds: 136.46
CalcMPEGStream: 756133568.80
Frames: 3152
CDSize: 740.00
Number of CDs: 1
Cut point 736.00
Executing Canopus ProCoder Encoder.
Program Handle not found, terminating program.
--------------------------------------------------------
- 2003/3/17 ?? 08:56:41
- Free on drive F: 21955.61 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "F:\test\Encoded_Video_TMPGEnc_NTSC.mpv" "F:\test\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.
--------------------------------------------------------
- 2003/3/17 ?? 08:56:50
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:56:57
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:57:03
- Free on drive F: 21955.61 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 2003/3/17 ?? 08:57:09
- Free on drive F: 21955.61 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 736 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\test\bbMPEG_Muxed_File.mpg"
-------------- dvd2svcd halt here ------------------------------------------
so, is there anyone could help me ?
Thanks in advanced !