Please help can not cdrw anymore

veigawy · Jun 27, 2003

I run windows 2000 pro sp3 i use nero 551035 as my my main cdburn software with a freecom usb2, my computer crash and couldn't boot any more for a while, i tryed to fix it using the recovery disk, which i think some changes in the registry were made, so i was able to load windows but since then i can't burn any disk, i though it was the cd burner problem, so moved it to another machine and worked perfect.
i did install again the aspi drivers, and i used fire burner but no luck, i attach the log file made by nero with the description of the error, if some could help me i would be very thankfully.

thanks

veigawy

can't attach file please see next reply

veigawy · Jun 27, 2003

veigawy said:
I run windows 2000 pro sp3 i use nero 551035 as my my main cdburn software with a freecom usb2, my computer crash and couldn't boot any more for a while, i tryed to fix it using the recovery disk, which i think some changes in the registry were made, so i was able to load windows but since then i can't burn any disk, i though it was the cd burner problem, so moved it to another machine and worked perfect.
i did install again the aspi drivers, and i used fire burner but no luck, i attach the log file made by nero with the description of the error, if some could help me i would be very thankfully.

thanks

veigawy

can't attach file please see next reply

===========================================

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36
Nero Version: 5.5.10.35
Recorder: <GENERIC FREECOM40B1> Version: 2.50 - HA 4 TA 0 - 5.5.10.35
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic STEALTH DVD> Version: - HA 0 TA 0 - 5.5.10.35
Adapter driver: <St320hg> HA 0
Bus Type : default (0) -> SCSI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : Generic STEALTH DVD St320hg Port 0 ID 0 DMA: ?
CdRomPeripheral : Generic STEALTH DVD St320hg Port 0 ID 1 DMA: ?
CdRomPeripheral : Generic STEALTH DVD St320hg Port 0 ID 2 DMA: ?
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST310211A atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM DDRS-34560D DC1B aic78u2 Port 3 ID 1 DMA: ?
CdRomPeripheral : PIONEER DVD-ROM DVD-303 1.10 aic78u2 Port 3 ID 5 DMA: ?
=======================

AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 82837504 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589360kB)
Free physical memory: 409MB (419788kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

26.6.2003
CD-ROM (ISO)
17:08:22 #1 Text 0 File Isodoc.cpp, Line 7576
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

17:08:22 #2 Phase 72 File dlgbrnst.cpp, Line 1655
BURN-Proof activated

17:08:22 #3 Text 0 File Reader.cpp, Line 115
Reader running

17:08:22 #4 Text 0 File Writer.cpp, Line 125
Writer GENERIC FREECOM40B1 running

17:08:22 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

17:08:22 #6 Text 0 File Burncd.cpp, Line 3737
Turn on Track-At-Once, using CD-R/RW media

17:08:22 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

17:08:23 #8 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 359846 (79:59.71)
Last address to be written: 599 ( 0:09.74)

17:08:23 #9 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

17:08:23 #10 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: GENERIC FREECOM40B1;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

17:08:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder GENERIC FREECOM40B1 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000

17:08:23 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

17:08:23 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [GENERIC FREECOM40B1 ]
--------------------------------------------------------------

17:08:23 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

17:08:23 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

17:08:23 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 32x (4,800 KB/s)

17:08:23 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

17:08:23 #18 Text 0 File Mmc.cpp, Line 18183
Set BUFE: BURN-Proof -> ON

17:08:24 #19 SCSI -500 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x02490000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

17:08:24 #20 Text 0 File Writer.cpp, Line 453
17:08:24.218 GENERIC FREECOM40B1 : WriteBuffer reduced to 32768 Bytes

17:08:24 #21 Text 0 File Writer.cpp, Line 316
17:08:24.234 - GENERIC FREECOM40B1 : Queue again later (Intervall : 13msec)

17:08:24 #22 SCSI -1114 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x02490000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

17:08:24 #23 CDR -500 File Writer.cpp, Line 333
SCSI/IDE Command aborted

17:08:24 #24 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

17:08:24 #25 SCSI -1033 File Cdrdrv.cpp, Line 1215
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

17:08:34 #26 CDR -1033 File WriterStatus.cpp, Line 191
Drive not ready

17:08:34 #27 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack

17:08:34 #28 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

17:08:34 #29 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

17:08:34 #30 Text 0 File Mmc.cpp, Line 13181
<GENERIC FREECOM40B1 > start Close Session

17:08:34 #31 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 32x (4,800 KB/s)

17:08:34 #32 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 02/05/2003 22:55:59
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 02/05/2003 22:55:59
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\st320hg.sys': Ver=3.20.0.0, size=85696 bytes, created 12/09/2002 11:49:36 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Duracell · Jun 27, 2003

veigawy said:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 02/05/2003 22:55:59
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 02/05/2003 22:55:59
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\st320hg.sys': Ver=3.20.0.0, size=85696 bytes, created 12/09/2002 11:49:36 (Adapter driver for src)

1. What other burning software do you have installed?

2. try ForceASPI 1.6 instead Adaptec's 4.71
Download: http://www.cdrbase.com/showthread.php?threadid=13922
run ForceASPI's "KillASPI" function first, then "InstASPI", reboot;

3. if it doesn't work, uninstall and reinstall Nero;

Greetings from
Duracell

veigawy · Jun 28, 2003

Thank you for your help i tryed but no luck, also i used Firebuner and another cd burner but no luck

-----------------------------------------------------------
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 02/05/2003 22:55:59
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 02/05/2003 22:55:59
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\aic78u2.sys': Ver=v3.00a, size=65168 bytes, created 07/12/1999 13:00:00 (Adapter driver for src)
---------------------------------------------------------------------

another options, other than format the HD?

thanks

veigawy

Duracell · Jun 29, 2003

veigawy said:
another options, other than format the HD?

wait some days before format; i will PM a expert member, maybe he is able to provide the right hints;

veigawy · Jun 29, 2003

Duracell said:
wait some days before format; i will PM a expert member, maybe he is able to provide the right hints;

Thanks Duracell i will wait

veigawy

LTR12101B · Jun 29, 2003

Might be worth running it by the forums at www.cdrinfo.com - CCampbell is from AHEAD (Nero) and is a pretty helpful guy.

If you've tried other programs as well though, it sounds like it's not a Nero issue.

Other than using the equivalent of device manager (I'm Win98SE) to delete and allow to redetect offending devices, I'm not sure what to suggest.

Gut feeling - is the USB2 drivers may have been damaged/downgraded when you had to restore.

Not sure if one of my old Win98 tricks would help (to freshen up the registry).
Create a second profile, rename the original profile.
On reboot, when it asks which profile to use, Create new (this will trigger hardware redetection, have your drivers to hand).
Then delete the other two profiles - this trick is normally useful for tidying up after a major hardware swap, as it cleans away unused device entries and redetects everything cleanly.

It MIGHT catch whatever got disrupted, and it's preferable to a complete re-install if it works.

Only other thing to try, is sp4 - another case of kill, cure or no effect.

scarecrow · Jun 30, 2003

Easy CD Creator (or is it Windows Media Player 9?- in any case the Roxio burning engine is active) Nero and Alcohol 120% in the same machine are not always the best company for a burner, and things get worse when this is an USB burner. Do you really need the Roxio program? If not, you may uninstall it.
May you also mention which peripherals you have hooked on your ST 320 controller?

veigawy · Jul 24, 2003

Please Help.

I decided to format the HD, i start everything again, but no luck i keep having the same problem, there is no problem with cd burners or usb2 cards, because they work perfect in another Pc.

Any chance of help here please, where i should look for.

Thank you very much

Duracell · Jul 24, 2003

Please could you attach the new log file?

veigawy · Jul 25, 2003

Duracell said:
Please could you attach the new log file?

Thanks duracell i post two files, one simulation another write.

can' t attach

=====================================
Simulation
=====================================

veigawy

1A23-0002-xxxx-9xxx-5628-xxxx

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'E:\Program files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 09:13:44
Nero version: 6.0.0.0
Recorder: <GENERIC FREECOM40B1> Version: 2.50 - HA 5 TA 0 - 6.0.0.0
Adapter driver: <> HA 5
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 1.0h - HA 0 TA 0 - 6.0.0.0
Adapter driver: <Imagedrv> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: ?
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST310211A atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM DDRS-34560D DC1B aic78u2 Port 3 ID 1 DMA: ?
CdRomPeripheral : PIONEER DVD-ROM DVD-303 1.10 aic78u2 Port 3 ID 5 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 4 ID 0 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 4 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 82837504 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589360kB)
Free physical memory: 424MB (435196kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

24.7.2003
CD-ROM (ISO)
23:54:55 #1 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

23:54:55 #2 Phase 72 File dlgbrnst.cpp, Line 1818
BURN-Proof activated

23:54:55 #3 Text 0 File Reader.cpp, Line 118
Reader running

23:54:55 #4 Text 0 File Writer.cpp, Line 127
Writer GENERIC FREECOM40B1 running

23:54:55 #5 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

23:54:56 #6 Text 0 File Burncd.cpp, Line 3081
Turn on Track-at-once, using CD-R/RW media

23:54:56 #7 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 599 ( 0:09.74)

23:54:56 #8 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

23:54:57 #9 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: GENERIC FREECOM40B1;
CD type reading failed
ATIP Data: ?

23:54:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [GENERIC FREECOM40B1 ]
--------------------------------------------------------------

23:54:57 #11 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to GENERIC FREECOM40B1 on a media

23:55:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder GENERIC FREECOM40B1 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000

23:55:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 938
Removed 2 run-out blocks from end of track 1.

23:55:06 #14 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

23:55:06 #15 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

23:55:06 #16 Phase 32 File dlgbrnst.cpp, Line 1818
Simulation started at 40x (6,000 KB/s)

23:55:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

23:55:06 #18 Text 0 File Mmc.cpp, Line 18119
Set BUFE: BURN-Proof -> ON

23:55:07 #19 SCSI -500 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x09F60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

23:55:07 #20 Text 0 File Writer.cpp, Line 455
23:55:07.609 GENERIC FREECOM40B1 : WriteBuffer reduced to 32768 Bytes

23:55:07 #21 Text 0 File Writer.cpp, Line 318
23:55:07.625 - GENERIC FREECOM40B1 : Queue again later (Intervall : 10msec)

23:55:07 #22 SCSI -1114 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x09F60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

23:55:07 #23 CDR -1114 File Writer.cpp, Line 335
Reset occurred

23:55:07 #24 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

23:55:07 #25 SCSI -1033 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 5, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

23:55:17 #26 CDR -1033 File WriterStatus.cpp, Line 147
Drive not ready

23:55:18 #27 TRANSFER -18 File WriterStatus.cpp, Line 147
Could not perform EndTrack

23:55:18 #28 CDR -201 File WriterStatus.cpp, Line 150
Invalid write state

23:55:18 #29 TRANSFER -18 File WriterStatus.cpp, Line 150
Could not perform EndTrack

23:55:18 #30 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

23:55:18 #31 Phase 34 File dlgbrnst.cpp, Line 1818
Simulation failed at 40x (6,000 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/07/2003 16:08:15
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/07/2003 16:08:15
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 29/03/2003 08:45:18 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

veigawy · Jul 25, 2003

veigawy said:
Thanks duracell i post two files, one simulation another write.

========================================

Write

========================================

veigawy

1A23-0002-1xxx-xxxx-5628-xxxx

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'E:\Program files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 09:13:44
Nero version: 6.0.0.0
Recorder: <GENERIC FREECOM40B1> Version: 2.50 - HA 5 TA 0 - 6.0.0.0
Adapter driver: <> HA 5
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 1.0h - HA 0 TA 0 - 6.0.0.0
Adapter driver: <Imagedrv> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: ?
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST310211A atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM DDRS-34560D DC1B aic78u2 Port 3 ID 1 DMA: ?
CdRomPeripheral : PIONEER DVD-ROM DVD-303 1.10 aic78u2 Port 3 ID 5 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 4 ID 0 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 4 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 82837504 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589360kB)
Free physical memory: 423MB (433608kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

24.7.2003
CD-ROM (ISO)
23:56:07 #1 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

23:56:07 #2 Phase 72 File dlgbrnst.cpp, Line 1818
BURN-Proof activated

23:56:07 #3 Text 0 File Reader.cpp, Line 118
Reader running

23:56:07 #4 Text 0 File Writer.cpp, Line 127
Writer GENERIC FREECOM40B1 running

23:56:07 #5 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

23:56:07 #6 Text 0 File Burncd.cpp, Line 3081
Turn on Track-at-once, using CD-R/RW media

23:56:07 #7 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 599 ( 0:09.74)

23:56:07 #8 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

23:56:07 #9 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: GENERIC FREECOM40B1;
CDR code: 00 97 15 12; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 0F 0C (LI 97:15.12), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

23:56:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [GENERIC FREECOM40B1 ]
--------------------------------------------------------------

23:56:07 #11 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to GENERIC FREECOM40B1 on a CD-R media

23:56:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder GENERIC FREECOM40B1 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000

23:56:08 #13 Text 0 File ThreadedTransferInterface.cpp, Line 938
Removed 2 run-out blocks from end of track 1.

23:56:08 #14 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

23:56:08 #15 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

23:56:08 #16 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 40x (6,000 KB/s)

23:56:08 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

23:56:08 #18 Text 0 File Mmc.cpp, Line 18119
Set BUFE: BURN-Proof -> ON

23:56:10 #19 SCSI -500 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x09FD0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

23:56:10 #20 Text 0 File Writer.cpp, Line 455
23:56:10.984 GENERIC FREECOM40B1 : WriteBuffer reduced to 32768 Bytes

23:56:11 #21 Text 0 File Writer.cpp, Line 318
23:56:11.000 - GENERIC FREECOM40B1 : Queue again later (Intervall : 10msec)

23:56:11 #22 SCSI -1114 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x09FD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

23:56:11 #23 CDR -1114 File Writer.cpp, Line 335
Reset occurred

23:56:11 #24 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

23:56:11 #25 SCSI -1033 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 5, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

23:56:21 #26 CDR -1033 File WriterStatus.cpp, Line 188
Drive not ready

23:56:21 #27 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack

23:56:21 #28 CDR -201 File WriterStatus.cpp, Line 191
Invalid write state

23:56:21 #29 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack

23:56:21 #30 Text 0 File Mmc.cpp, Line 13141
<GENERIC FREECOM40B1 > start Close Session

23:56:21 #31 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

23:56:21 #32 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 40x (6,000 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/07/2003 16:08:15
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/07/2003 16:08:15
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 29/03/2003 08:45:18 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

scarecrow · Jul 25, 2003

You did a fresh format and after that you reinstalled all that useless Roxio crap again... (ASPI 4.7X and Creator). I strongly suspect that you don't really want to burn something at sometime.
Also why do you need having the Nero Imagedrive active+eating some resources since you have also Daemon Tools installed?

Duracell · Jul 25, 2003

scarecrow said:
You did a fresh format and after that you reinstalled all that useless Roxio crap again... (ASPI 4.7X and Creator). I strongly suspect that you don't really want to burn something at sometime.

yepp, scarecrow is right;
Why didn't you install only XP and Nero to get a working burning software?

----------------------------------------------------------------------
File 'Drivers\CDR4_2K.SYS'
File 'Drivers\CDRALW2K.SYS
File 'Drivers\ASPI32.SYS
----------------------------------------------------------------------
al those drivers are not installed by XP or Nero;

LTR12101B · Jul 25, 2003

http://ahead.de/en/content/c1023694368810.html#11

Dropping Nero's Winaspi32 file into the directory with it may help.

Nero also has local copies of some system files - eg. the troublesome Msvcrt.dll / Msvcirtl.dll pair.
If an incompatible version is active from somewhere else, then this may result in mismatch troubles - I've seen what that can do to other programs.

One suggestion - www.freshdevices.com - 3 useful tools for the price of a spamvertising email signup (fairs fair, they send ONE ad-loaded email each time any of the tools is updated - nothing else).
The tool you want is FRESH DIAGNOSE
Snapshot - Processes will let you see which modules (DLL) are being used by each process.
Snapshot - Modules will ley you see the details of each module, including version and where loaded from

scarecrow · Jul 25, 2003

CDR4_2K.SYS and CDRALW2K.SYS may also be installed by WMP 9... and of course they aren't any good for the puters' health if you use programs other that the two Roxio bloaters.

Duracell · Jul 25, 2003

scarecrow said:
CDR4_2K.SYS and CDRALW2K.SYS may also be installed by WMP 9...

How can he get rid these incompatibly drivers?
Should uninstalling WMP 9 be enough?

veigawy · Jul 26, 2003

scarecrow said:
You did a fresh format and after that you reinstalled all that useless Roxio crap again... (ASPI 4.7X and Creator). I strongly suspect that you don't really want to burn something at sometime.
Also why do you need having the Nero Imagedrive active+eating some resources since you have also Daemon Tools installed?

Thanks for your reply, i recall roxio was installed when i installed windows media 9 , could be the problem ? if it is how do i uninstall roxio creater i tried to look for some way to uninstall it, but i can't find it, i will follow your advice to install the nero dll files.
i will keep you aware of my progress.

thanks again all

veigawy

banzibaby · Jul 26, 2003

If i recall right there is a way there is a way 2 install medai player 9 without installin the roxio plugin, sure it was a reg hack in the mdia player setup bit, if U do a search on it U might find it

Was a subkey that blocked the install of that component.Do a search 4 roxio cd plugin reg hack or blocker

BaNzI

veigawy · Jul 27, 2003

this is geting very complicated, i tell you what i done:

I used registry crawler to locate registry entries and path location of files related to roxio, so i deleted the registry entries and the files. also i deleted the aspi 471 and unisntall nero.
1st i rebbot the computer then i installed nero6 the new one, i tested in simulation mode, so same thing happened,see file "log simulation without aspi 4.60".

then i installed aspi 460 and reboot the computer, and i tested again in simulation mode, and happaned again see file log simulation with aspi 4.60.

No WMP9 intalled.

i couldn't follow scarecrow advice:

Quote:
==================================
Dropping Nero's Winaspi32 file into the directory with it may help.

Nero also has local copies of some system files - eg. the troublesome Msvcrt.dll / Msvcirtl.dll pair.
If an incompatible version is active from somewhere else, then this may result in mismatch troubles - I've seen what that can do to other programs
===================================

Because i couldn't find any such files in the add mentioned above, so i still need your guys help in such bizarre case.

++++++++++++++++++++++++++++++++++++++++

Simulation test without aspi 4.60

veigawy

1A23-xxxx-1084-xxxx-xxxx-xxxx

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero version: 6.0.0.9
Recorder: <GENERIC FREECOM40B1> Version: 2.50 - HA 4 TA 0 - 6.0.0.9
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-303 >Version: 1.10 - HA 2 TA 5 - 6.0.0.9
Adapter driver: <aic78u2> HA 2
Bus Type : default (0) -> SCSI, detected: SCSI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST310211A atapi Port 1 ID 0 DMA: On
DiskPeripheral : IBM DDRS-34560D DC1B aic78u2 Port 2 ID 1 DMA: Off
CdRomPeripheral : PIONEER DVD-ROM DVD-303 1.10 aic78u2 Port 2 ID 5 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 3 ID 1 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 82837504 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589360kB)
Free physical memory: 350MB (358988kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

27.7.2003
CD-ROM (ISO)
00:32:30 #1 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

00:32:30 #2 Phase 72 File dlgbrnst.cpp, Line 1843
BURN-Proof activated

00:32:30 #3 Text 0 File Reader.cpp, Line 118
Reader running

00:32:30 #4 Text 0 File Writer.cpp, Line 127
Writer GENERIC FREECOM40B1 running

00:32:30 #5 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

00:32:30 #6 Text 0 File Burncd.cpp, Line 3173
Turn on Track-at-once, using CD-R/RW media

00:32:30 #7 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 599 ( 0:09.74)

00:32:30 #8 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

00:32:30 #9 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: GENERIC FREECOM40B1;
CDR code: 00 97 15 12; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 0F 0C (LI 97:15.12), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

00:32:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [GENERIC FREECOM40B1 ]
--------------------------------------------------------------

00:32:31 #11 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [GENERIC FREECOM40B1 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
600 | lead-out | 1 | 0x00 | 0x41

00:32:31 #12 Text 0 File ThreadedTransferInterface.cpp, Line 964
Removed 2 run-out blocks from end of track 1.

00:32:31 #13 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

00:32:31 #14 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

00:32:31 #15 Phase 32 File dlgbrnst.cpp, Line 1843
Simulation started at 40x (6,000 KB/s)

00:32:31 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

00:32:31 #17 Text 0 File Mmc.cpp, Line 18724
Set BUFE: BURN-Proof -> ON

00:32:32 #18 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09F60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

00:32:32 #19 Text 0 File Writer.cpp, Line 455
00:32:32.812 GENERIC FREECOM40B1 : WriteBuffer reduced to 32768 Bytes

00:32:32 #20 Text 0 File Writer.cpp, Line 318
00:32:32.812 - GENERIC FREECOM40B1 : Queue again later (Intervall : 10msec)

00:32:32 #21 SCSI -1114 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09F60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

00:32:32 #22 CDR -1114 File Writer.cpp, Line 335
Reset occurred

00:32:32 #23 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

00:32:33 #24 SCSI -1033 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

00:32:43 #25 CDR -1033 File WriterStatus.cpp, Line 149
Drive not ready

00:32:43 #26 TRANSFER -18 File WriterStatus.cpp, Line 149
Could not perform EndTrack

00:32:43 #27 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state

00:32:43 #28 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

00:32:43 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

00:32:43 #30 Phase 34 File dlgbrnst.cpp, Line 1843
Simulation failed at 40x (6,000 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/07/2003 16:08:15
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/07/2003 16:08:15
File 'Drivers\aic78u2.sys': Ver=v3.00a, size=65168 bytes, created 07/12/1999 13:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

******************************************

Simulation test with aspi 4.60

veigawy

1A23-xxxx-1084-xxxx-6340-xxxx

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero version: 6.0.0.9
Recorder: <GENERIC FREECOM40B1> Version: 2.50 - HA 4 TA 0 - 6.0.0.9
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-303 >Version: 1.10 - HA 2 TA 5 - 6.0.0.9
Adapter driver: <aic78u2> HA 2
Bus Type : default (0) -> SCSI, detected: SCSI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST310211A atapi Port 1 ID 0 DMA: On
DiskPeripheral : IBM DDRS-34560D DC1B aic78u2 Port 2 ID 1 DMA: Off
CdRomPeripheral : PIONEER DVD-ROM DVD-303 1.10 aic78u2 Port 2 ID 5 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 3 ID 1 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 82837504 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589360kB)
Free physical memory: 379MB (389004kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

27.7.2003
CD-ROM (ISO)
01:16:06 #1 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

01:16:06 #2 Phase 72 File dlgbrnst.cpp, Line 1843
BURN-Proof activated

01:16:07 #3 Text 0 File Reader.cpp, Line 118
Reader running

01:16:07 #4 Text 0 File Writer.cpp, Line 127
Writer GENERIC FREECOM40B1 running

01:16:07 #5 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

01:16:07 #6 Text 0 File Burncd.cpp, Line 3173
Turn on Track-at-once, using CD-R/RW media

01:16:07 #7 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 1095 ( 0:16.45)

01:16:07 #8 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

01:16:07 #9 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: GENERIC FREECOM40B1;
CD type reading failed
ATIP Data: ?

01:16:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1096 (1096) = #1096/0:14.46
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1094 blocks [GENERIC FREECOM40B1 ]
--------------------------------------------------------------

01:16:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [GENERIC FREECOM40B1 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2551808, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1096 | lead-out | 1 | 0x00 | 0x41

01:16:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 964
Removed 2 run-out blocks from end of track 1.

01:16:17 #13 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

01:16:17 #14 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

01:16:17 #15 Phase 32 File dlgbrnst.cpp, Line 1843
Simulation started at 40x (6,000 KB/s)

01:16:17 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

01:16:17 #17 Text 0 File Mmc.cpp, Line 18724
Set BUFE: BURN-Proof -> ON

01:16:18 #18 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09F60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

01:16:18 #19 Text 0 File Writer.cpp, Line 455
01:16:18.484 GENERIC FREECOM40B1 : WriteBuffer reduced to 32768 Bytes

01:16:18 #20 Text 0 File Writer.cpp, Line 318
01:16:18.500 - GENERIC FREECOM40B1 : Queue again later (Intervall : 10msec)

01:16:18 #21 SCSI -1114 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09F60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

01:16:18 #22 CDR -1114 File Writer.cpp, Line 335
Reset occurred

01:16:18 #23 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

01:16:18 #24 SCSI -1033 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01

01:16:28 #25 CDR -1033 File WriterStatus.cpp, Line 149
Drive not ready

01:16:28 #26 TRANSFER -18 File WriterStatus.cpp, Line 149
Could not perform EndTrack

01:16:28 #27 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state

01:16:28 #28 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

01:16:28 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

01:16:28 #30 Phase 34 File dlgbrnst.cpp, Line 1843
Simulation failed at 40x (6,000 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/07/2003 16:08:15
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/07/2003 16:08:15
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\aic78u2.sys': Ver=v3.00a, size=65168 bytes, created 07/12/1999 13:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)