Network adapter!!!!!!

[zver]

Ok guys,found some old network card from my old pc and installed it--it works but---------Can somebody tell me which setting i should put from those 4----read help but nothing normal come from it--can somebody tell me what is the best mode from this 4-windows xp-home-p4--static ip from router to pc--(specs)--dsl--average speed 1-1.5Mbs..........And second one is--ditched snagit couse i found that irfanwiev can do screencapture--but everytime he pulls picture to the right????On a screenshot you`ll see its the pulled to right???Why??Couse the property screen was around midlle and left is ok---but right is black---just try to open a picture with irfanwiev and you`ll see what i mean??Thanks a lot!!!!!!!!

 

[LTR12101B]

AUI/10base 5 is the "transceiver drop cable" interface, the multipin connector, no use without an external transceiver unit.

BNC/10base2 is the "Thinwire" interface, for co-ax cable on a T-piece.

TP Full duplex and TP half duplex are both the "RJ45" (like a telephone plug) connector.
TP = "twisted pair" - and this is also known as UTP "Unshielded Twisted Pair"

If you KNOW that what you are connecting to supports duplex mode, use FULL, otherwise use HALF.

If you attempt to use full duplex (simultaneous transmit and receive) when not supported, you will get high error rate and packet loss.

I'm surprised there's no AUTO mode!
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=14&Software=True
Resources - a later driver MAY offer auto! - no update for XP though!

 

[NewGen]

Is anyone using CAT-6 ??? or is it still a non-feasible solution... hehehe...