nero 7 used read buffer

chronicking · May 14, 2007

how's it goin? i haven't been to the forum in awhile and this is probably a redundant question but i can't seem to find it in the search.

i recently updated from nero 6 to 7 and all seems to be well except one thing.
the used read buffer during the burning stages while using the burning rom part of the software.
when i used nero 6 my entire used read buffer filled up and it burnt fine. now when using nero 7 my used read buffer fills to about 40% then stays there and the process takes up to like 15 minutes [ vs. like 8 mins in the past @ 8x]

the dma is set on all drives [hd's and optical drives]
i 'm running 2g's of ram
i have a pent 4 3ghz processor
and the aspi layer is up to date [4.71]

i uninstalled the software and went back to nero 6 and it worked fine like it used to. i then reinstalled nero 7 and now back to slo burning and half filled used read buffers.

any suggestions or miracle fixes? i appreciate all whom read this post and try to help. thanx!

Nunyobiznes · May 14, 2007

I suggest Padus.

Duracell · May 14, 2007

please attach the Nero log file here, so we can look for conflicting drivers; the Nero log file is called "NeroHistory.log" and is stored in the Nero program folder; when posting the file please delete out your Nero serial number;

but in generally "don't fix what isn't broken"; so my suggestion is staying with the lastes version 6;

Greetings from
Duracell

VIPER_1069 · May 15, 2007

Would of said DMA but you checked this and v6 worked fine .. as above if it aint BROKE

im still using 5.5.x.x and no bothers at all

VIPER_1069 · May 15, 2007

VIPER_1069 said:
Would of said DMA but you checked this and v6 worked fine .. as above if it aint BROKE

im still using 5.5.x.x and no bothers at all

All later versions are BLOATWARE or waste of time /disks

chronicking · May 18, 2007

well i went to nero.com and downloaded their reg cleaner and other clean packs for nero 6. this seemed to solve the problem. once i reinstalled nero 7, the read buffer filled up and i'm not in the business of making coasters anymore. i appreciate the replies.

i've used nero products since like nero 3 i think maybe even earlier, but i've had no probs or qualms about this software at all. 5 was great, lean , and very simple to use. i liked 6 very much too. i still have it on one of our pcs. 7 i'm just getting used to it. it would be nice if it didn't have all the extra crap like sound trax, nero scout, back it up, or a few of the other options you can choose during installation. i do like recode though. i used to use shrink in the past and nero recode's quality , to myself and people here, is much better and sharper. i'm not sure about this recode version that's packed in nero 7. i'll have to play with it for awhile. nero vision isn't that bad of a one click app when it comes to converting avi's. i have a standalone player to watch all me avi's but when i need to convert one for a family member or friend real quick , nero vision gets the job done.

once again i apprectiate your replies and thanx for the info.........lata

VIPER_1069 · May 19, 2007

F.Y.I. RECODE is essentially DVD SHRINK but slightly repackaged/reprogrammed with a different interface for AHEAD as they bought the rights to it along with its programmer hence no more shrink after 3.2

You may of noticed its got a lot of similarities to SHRINK

LTR12101B · May 19, 2007

Thanks, reminds me I should do the same when I bite the bullet and replace my old OEM 6.x with a full 7.x.

Not heard much of new releases, perhaps a sign that it's settled

chronicking · May 20, 2007

well guys i celebrated too soon..........

.it's doing it again. this time i saved the log before reverting back to nero6 and like before nero6 works like it should[fills up the read buffer] i'll paste this log in case one of you would like to try to figure out the confliction. i did notice a nero error about half way thru it . perhaps that's it. i have nero7 on my second pc and it fills the buffer up. i'll post the successful log as well. hope someone can figure this out.........

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.8.5.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-820A F: CDRom0
SCSIVAX DVD/CD-ROM H: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 2038MB (2087916kB)
Free physical memory: 1641MB (1681028kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.5.2007
UDF/ISO compilation
8:44:05 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:44:05 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started

8:44:05 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 616
Content of VIDEO_TS.IFO has been modified

8:44:05 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 616
Content of VIDEO_TS.BUP has been modified

8:44:05 PM #5 Phase 113 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed

8:44:06 PM #6 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:44:06 PM #7 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted

8:44:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

8:44:06 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

8:44:06 PM #10 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

8:44:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2197359 (488:18.09, 4291MB)

8:44:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

8:44:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-820A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

8:44:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:44:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2197360 (2197360) = #2197360/488:18.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2197360 blocks [F: SONY DVD RW DRU-820A]
--------------------------------------------------------------

8:44:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4500193280, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2197360 | 0 | 0x00
2197360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:44:06 PM #17 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:44:06 PM #18 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

8:44:06 PM #19 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

8:44:06 PM #20 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

8:44:06 PM #21 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

8:44:06 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

8:44:06 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:44:06 PM #24 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

8:44:06 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06be1040: Len x648

8:44:06 PM #26 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

8:44:06 PM #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

8:44:38 PM #28 Phase 40 File dlgbrnst.cpp, Line 1435
Aborted by user

8:44:57 PM #29 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 32

8:45:03 PM #30 Text 0 File DVDR.cpp, Line 7281
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished successfully, return code 0

8:45:03 PM #31 CDR -1207 File DVDR.cpp, Line 6356
Book Type automatically set to: DVD-ROM

8:45:03 PM #32 Phase 39 File dlgbrnst.cpp, Line 1762
Burn process aborted

8:45:03 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:45:06 PM #34 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

8:45:06 PM #35 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

OK HERE"S THE GOOD LOG WHERE BUFFFER FILLS UP PROPERLY

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <LITE-ON DVDRW LH-16W1P> Version: SL02 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-16W1P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
Memorex DVD+/-DLRWL1 F16 F: CDRom0
LITE-ON DVDRW LH-16W1P G: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 1023MB (1047832kB)
Free physical memory: 720MB (737596kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.5.2007
UDF/ISO compilation
8:53:31 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:53:31 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started

8:53:31 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)

8:53:31 PM #4 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:53:31 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted

8:53:31 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

8:53:31 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

8:53:31 PM #8 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

8:53:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1920335 (426:44.35, 3750MB)

8:53:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

8:53:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: LITE-ON DVDRW LH-16W1P, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

8:53:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:53:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1920336 (1920336) = #1920336/426:44.36
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1920336 blocks [G: LITE-ON DVDRW LH-16W1P]
--------------------------------------------------------------

8:53:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-16W1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3932848128, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1920336 | 0 | 0x00
1920336 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:53:31 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:53:32 PM #16 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-No (<64KB)

8:53:32 PM #17 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 12x (16,620 KB/s)

8:53:32 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:53:32 PM #19 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode

8:53:32 PM #20 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes

8:53:32 PM #21 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:53:32 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

8:54:03 PM #23 Text 0 File Cdrdrv.cpp, Line 1338
20:54:03.296 - G: LITE-ON DVDRW LH-16W1P : Queue again later

8:59:49 PM #24 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-16W1P> start writing Lead-Out at LBA 1920336 (1D4D50h), length 0 blocks

8:59:59 PM #25 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was 1920335 (1D4D4Fh)

8:59:59 PM #26 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 12x (16,620 KB/s)

8:59:59 PM #27 Phase 78 File dlgbrnst.cpp, Line 1762
Data verification started

9:00:02 PM #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

9:04:22 PM #29 Phase 80 File dlgbrnst.cpp, Line 1762
Data verification completed successfully

9:04:23 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:04:30 PM #31 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

9:04:30 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

THANKS AGAIN!!!!!

VIPER_1069 · May 20, 2007

SENSE errors are usually a MEDIA ISSUE but if you havent tried any other brands meantime and both burns were on the same media then that issue is ruled out

LTR12101B · May 20, 2007

Looks like the burns were on different media, as well as on different drives.

I see the DRU-820A is at firmware 1.0b - there is a 1.0c update
http://sony.storagesupport.com/dvdrw/firmware.htm

Also, which drive was it burning from, looks like it shares an IDE with a hard disk, and that strains throughput.

chronicking · May 21, 2007

yeah one log is from a pc whre nero 7 is working correctly [buffr stays full] that's the good log. the other log is where the issue is. i have tried it with my memorex drive, my Liteon drive, and lastly me sony drive. they all do the same thing. i surrendered for now til i read something or get lucky and switched back to nero 6. i miss some of the stuff on nero 7 but me read buffer stays full and even does so burning from a hard drive on the same IDE strap[secondary]. i'll go ahead and post the nero 6 log that i saved after reinstalling it and having a successful burn[read buffer stayed full and burned in a timely manner] it still had the sense error but the buffer stayed full none the less....strange.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 6.6.1.15
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-820A F: CDRom0
SCSIVAX DVD/CD-ROM H: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2038MB (2087916kB)
Free physical memory: 1586MB (1624840kB)
Memory in use : 22 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2007
UDF/ISO compilation
11:53:49 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:53:50 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

11:53:50 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.IFO has been modified

11:53:50 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.BUP has been modified

11:53:50 PM #5 Phase 113 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed

11:53:50 PM #6 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:53:50 PM #7 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

11:53:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:53:50 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:53:50 PM #10 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

11:53:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2197359 (488:18.09, 4291MB)

11:53:50 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:53:50 PM #13 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: SONY DVD RW DRU-820A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

11:53:50 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:53:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2197360 (2197360) = #2197360/488:18.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2197360 blocks [SONY DVD RW DRU-820A ]
--------------------------------------------------------------

11:53:50 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4500193280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2197360 | lead-out | 1 | 0x41 | 0x00

11:53:50 PM #17 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:53:50 PM #18 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:53:50 PM #19 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

11:53:50 PM #20 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:53:50 PM #21 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)

11:53:50 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:53:50 PM #23 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

11:53:50 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x04c80f40: Len x648

11:53:50 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

12:08:01 AM #26 Text 0 File WriterStatus.cpp, Line 113
<SONY DVD RW DRU-820A > start writing Lead-Out at LBA 2197360 (218770h), length 0 blocks

12:08:08 AM #27 Text 0 File DVDR.cpp, Line 6510
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished successfully, return code 0

12:08:08 AM #28 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM

12:08:08 AM #29 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5,540 KB/s)

12:08:08 AM #30 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

12:17:49 AM #31 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

12:17:50 AM #32 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:17:54 AM #33 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

12:17:54 AM #34 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 6:34:55 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\SCSIPORT.SYS': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 7:00:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

the reason for the DVD/RW is because i quit burning my regular dvds [memorex/sony] until i got the read buffer to act right. with nero 7 installed it wouldn't even fill up burning @2.4x. there was clearly a confliction somewhere. thanx again for your input and firmware update [nice!]. i'll monitor this post now and then to see if you guys get any ideas on this matter. thanx

chronicking · May 21, 2007

guys i just noticed looking at these logs.........nero six shows the location of my aspi layer [4.71]. nero seven does not at the beginnning of each log yet it says SPTI used. isn't that microsoft's aspi layer kinda? they say seven is ready for vista. i wonder if seven is even designed to use the old adaptec aspi layer. also the info tool that comes with seven doesn't even have a tab showing the current aspi layer. all other versions of nero i've had have done so. and all faq's and literature reccomend updating your aspi layer before troubleshooting anything else. id ont' know but it's a crusty thought.

8:44:06 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06be1040: Len x648

i looked up the key illegal request codes and found this

5 24 00 Illegal Request - invalid field in CDB (Command Descriptor Block)

Duracell · May 23, 2007

chronicking said:
... nero seven does not at the beginnning of each log yet it says SPTI used. isn't that microsoft's aspi layer kinda?

it is XP's native burning interface similar to an ASPI layer;

LTR12101B said:
... Also, which drive was it burning from, looks like it shares an IDE with a hard disk, and that strains throughput.

DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 1 ID 1 DMA: On

i second this theory; the Sony seems to be the Maxtor's master, not the best configuration solution;
have a look, chronicking: http://forum.dvdrbase.info/showthread.php?p=237875

scarecrow · May 25, 2007

May I ask why you've installed the Adaptec Ultra160 SCSI miniport driver at your system? You don't have any real SCSI peripherals, just a virtual one (probably Alcohol 120% drive) which does not need such a driver.
I also wonder where PXHELP20.SYS: Ver=2.03.32a comes from- its not the version of the Sonic ASPI driver used in Winamp and other simlar products.
And finally, the indicated ASPI version for Windows XP is *not* 4.71, but the older 4.61- unless you are using special hardware, like SCSI LVD harddisks.
And, unless you feel its absolutely necessary to use Alcohol 120% (or is it Daemon Tools 4.X?) I'd suggest using a milder CD-ROM emulator: the antiprotection rootkit used in A120% - DT 4.X is too intrusive to be considered as a sane software solution.

chronicking · Jul 24, 2007

sorry about the slow follow up for this thread guys. i've been working like a madman of late........... anywayz, i took the advice of this thread and updated me firmware for me sony drive, replaced me old [40 wire] IDE straps with the new [80wire] ones, uninstalled alcohol 120 [never really used it], and now just use windows spti interface. none of this did the trick......... but it does burn fine at 4x or slower [4x is fine]. i am in agreeance with LTR1280 that the HD and Burner are too much for the one IDE channel. after reading the link from Duracell, i am beginning to wonder if i should switch my configuration on the secondary IDE channel [ like making the HD the master].
if i do this, i wonder if it will affect the burner when burning from the main HD.....? like i said guys, sorry bout the momentary lapse of reason on this thread. lata

Duracell · Jul 24, 2007

chronicking said:
... if i should switch my configuration on the secondary IDE channel [ like making the HD the master].
if i do this, i wonder if it will affect the burner when burning from the main HD.....?

it cound't make the things more worst than yet;

and of course it depends which your "main HD" is; if the "main HD" is one of this

Code:

DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On 
DiskPeripheral : MAXTOR STM3320620A atapi Port 0 ID 1 DMA: On

it wouldn't effect because the different IDE channel;

chronicking · Jul 24, 2007

cool i'll switch it when i get back from work then burn a couple of coasters to see if it still worx or affects the burning speed. thanx for the advice.

nero 7 used read buffer

chronicking

Member

Nunyobiznes

1

Duracell

1

VIPER_1069

1

VIPER_1069

1

chronicking

Member

VIPER_1069

1

LTR12101B

1

chronicking

Member

VIPER_1069

1

LTR12101B

1

chronicking

Member

chronicking

Member

Duracell

1

scarecrow

1

chronicking

Member

Duracell

1

chronicking

Member