Did the tutes and still an error!

[PJW]

Took the expert advise and followed the excellent tutorials for beginers. Can any throw some light on the follow error message being thrown up when trying burn with BAO?

Found DVD+ media but DVD+R/DVD+RW support code is missing.
If you need DVD+R/DVD+RW support, ask the Author for cdrecord-ProDVD.
Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target.
Cdrecord 2.01a16-dvd (i686-pc-cygwin) Copyright (C) 1995-2003 J÷rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'rs-0.7+'
Driveropts: 'burnfree'
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.07'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A
Profile: 0x001B
Profile: 0x001A (current)
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-ROM driver (mmc_cd).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 45158400 = 44100 KB
Unspecified command not implemented for this drive.
WARNING: Could not manage to find medium size, and more than 90 mins of data.
Track 01: data 4222 MB
Total size: 4849 MB (480:26.94) = 2162021 sectors
Lout start: 4849 MB (480:28/71) = 2162021 sectors
Current Secsize: 2048
Starting to write CD/DVD at speed 16 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... I/O error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 10
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x10 (medium not formatted) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
input buffer ready.
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 0 K BSize: 1568 K
Starting new track at sector: 0

CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 10
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x10 (medium not formatted) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
A write error occured.
Please properly read the error message above.

write track data: error after 0 bytes
Writing time: 5.057s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
fifo had 688 puts and 1 gets.
fifo was 0 times empty and 0 times full, min fill was 100%.

 

[RASTABT]

Hi and welcome you need to install ProDVD!
More info can be found @ www.burnatonce.com so please check their forum for full details. Below is some info taken from their forum.

How do I install ProDVD for burnatonce?
Download ProDVD, rename it to prodvd.exe and copy it into the burnatonce\external folder

Change UseProDVD=False to UseProDVD=True in the burnatonce.ini file
To write more than 1GB you'll need a license key for ProDVD which is available from the author. You must state that you require a key for windows - the key included in the readme file does not work in windows. Keys are free for non commercial use only, please contact the author regarding commercial license keys. The author is the only person to contact for keys!

To activate the license key it must be set as an environment variable as follows:

CDR_SECURITY={YOUR KEY HERE}
jamieo

 

[PJW]

Prodvd

doesn't this programme have a 15 day trial period? I know that I'm very green as far as burning dvd goes but I now have 3 different programmes doing three different jobs and now I need a 4th, is that right?

 

[woody]

You need a program to burn the files created by Dvdshrink.Burn at Once will not work for you(as posted).RecordNowMax,or Nero should work.Both can be used as demos to see if you like them

Do you have any other Dvd burning software?Not EasyCd/dvd Creator...LOL!