Can someone please help me out with Sygate Personal Firewall Pro? I would like to use that firewall software, but I can't seem to get it to work with my Internet Connection Sharing. Currently i'm a ICS Gateway and my sis's computer is the client. I can't seem to figure how/what options in the Sygate i can do to make it recognize my computer is a ICS gateway.
configure ICS for Sygate Personal Firewall Pro
- Thread starter trueboyz
- Start date
easiest way to configure Sygate Firewall, is to go into options. Then select network neighbourhood tab>select your NIC card being used on the LAN between you & your sister, & then just make sure to checkmark both "Allow..." settings for the Network Neighbourhood Settings.
This should allow communication between your machines now.
Otherwise post back & we'll see what else could be blocked (but these settings work fine for my machines).
This should allow communication between your machines now.
Otherwise post back & we'll see what else could be blocked (but these settings work fine for my machines).
I don't run ICS at all trueboyz =). Never liked how MSN handled LAN/internet settings. I use proxy from analog x (small & simple to use).
(h**p://www.analogx.com)
(h**p://www.analogx.com)
Last edited:
it's very simple. Just run it & set the browser on the other machines to go to a particular port. That's it.
Also helps if those PCs & the NIC card on your machine that is on the network have a set IP addy (don't let the LAN card detect an ip address automatically). That program has a tutorial (once installed) but most others will also. That's all there is to it. Run it when you want & that's all.
Also helps if those PCs & the NIC card on your machine that is on the network have a set IP addy (don't let the LAN card detect an ip address automatically). That program has a tutorial (once installed) but most others will also. That's all there is to it. Run it when you want & that's all.