Duracell said:
Duracell I followed the tutorial at
http://www.dvdrbase.com/showthread.php?t=31155. I ripped and transcoded it and everything worked fine. Then when I went to copy the rip to DVD using burnatonce this eror message comes up in the commands log
Found DVD+ media but DVD+R/DVD+RW support code is missing.
If you need DVD+R/DVD+RW support, ask the Author for cdrecord-ProDVD.
Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target.
Cdrecord 2.01a16-dvd (i686-pc-cygwin) Copyright (C) 1995-2003 J÷rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'rs-0.7+'
Driveropts: 'burnfree'
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A (current)
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-ROM driver (mmc_cd).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 983040 = 960 KB
FIFO size : 45158400 = 44100 KB
Unspecified command not implemented for this drive.
WARNING: Could not manage to find medium size, and more than 90 mins of data.
Track 01: data 4458 MB
Total size: 5119 MB (507:14.34) = 2282576 sectors
Lout start: 5120 MB (507:16/26) = 2282576 sectors
Current Secsize: 2048
Starting to write CD/DVD at speed 18 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... I/O error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0F 30 05
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
input buffer ready.
Writing pregap for track 2 at -150
write track pad data: error after 0 bytes
BFree: 960 K BSize: 960 K
Starting new track at sector: 0
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0F 30 05
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
A write error occured.
Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 5.092s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
fifo had 688 puts and 1 gets.
fifo was 0 times empty and 0 times full, min fill was 100%.