Hi.
A few months a go I bought an xecutor 2 chip which was a diy chip flashed with xecutor 2 bios as I understand it. However, under evolution 1.8.3725, I am having a lot of difficulties in getting my xbox to give me an IP number. Only 0.0.0.0 is displayed near the top under TYPE. My setup is as follows: pc to xbox connection with crossed patch cable. On the PC, the cable is plugged into my inbuilt P4PE motherboard ethernet socket.
I have also followed the instructions at this site:
http://evox.xboxhackz.net/evox/guides/body_basic_networking.html
"If you have loaded the EvolutionX dashboard onto your Xbox, and you want to assign your Xbox a Static IP, go into Network, and under Static IP, enter: 192.168.0.x (where x is a number from 2 - 255). For the Default Gateway, enter: 192.168.0.1." I have set x as 3.
Unfortunately, my xbox still fails to give an IP number other than 0.0.0.0
Also, under evolution 1.8.3725 , my chip is identified as "Matrix Inside". This is confusing.
I hope you can help.
alpha0005
A few months a go I bought an xecutor 2 chip which was a diy chip flashed with xecutor 2 bios as I understand it. However, under evolution 1.8.3725, I am having a lot of difficulties in getting my xbox to give me an IP number. Only 0.0.0.0 is displayed near the top under TYPE. My setup is as follows: pc to xbox connection with crossed patch cable. On the PC, the cable is plugged into my inbuilt P4PE motherboard ethernet socket.
I have also followed the instructions at this site:
http://evox.xboxhackz.net/evox/guides/body_basic_networking.html
"If you have loaded the EvolutionX dashboard onto your Xbox, and you want to assign your Xbox a Static IP, go into Network, and under Static IP, enter: 192.168.0.x (where x is a number from 2 - 255). For the Default Gateway, enter: 192.168.0.1." I have set x as 3.
Unfortunately, my xbox still fails to give an IP number other than 0.0.0.0
Also, under evolution 1.8.3725 , my chip is identified as "Matrix Inside". This is confusing.
I hope you can help.
alpha0005
