I found a fix within about 10x- hope you find your fix.
Result! Followed advice given by your Troubleshooter link (delete temp
internet, delete history, delete everything in the Windows Update
folder except Iuhist.xml in the V4 folder, search for iuctl.dll and
Iuengine.dll and deleted them) and all seems OK.
Home Page | Main Article Index | FREE XP Newsletter | Contact Me
Windows Update Fails
Error 0x800A138F
Windows Update Failure - Error Code 0x800A138F
Sometimes Windows Update seems to do odd things..
A typical email requesting help from this website, goes
like this:
----------------------------------------------------------------------------------------
Dear Marc,
When I access the Windows update web site everything is working fine
until....
I click the "Scan Now"
I pick from the list patches I wish to install
I then click the "review and install" button
It takes me to the next window where it says "Install now"
Just as I click the "install now" button I get the following error
message....
Windows Update Error
Windows Update has encountered an error and cannot display the requested
page.
Select from any of the following pages for information about Windows Update
services, or send us your feedback.
Windows Update Home Page
About Windows Update
Support Information
Send error number to Microsoft (0x800A138F)
(Note This sends error information but does not create a support incident;
you may or may not receive a response.)
I am very frustrated!
Can you help?
-------------------------------------------------------------------------------------------
Rather than try and send individual emails, I have posted this article on my website.
The aim of this article is to help you solve this 0x800A138F problem and have you updating your Windows XP Professional or Home Edition computer as soon as possible!
(This is also a known issue with some installations of Windows 2000 Professional AFTER applying Service Pack 3)
As usual all advice is offered as-is without warranty of any kind....
What Is The 0x800A138F problem?
I do NOT want to get too technical in this support article. Simply because most of you reading this, want a solution and not a technical briefing! Also, many of you are new(ish) to Windows XP and I am not here to confuse you either...
Essentially when your computer communicates with the Windows Update website. It uses TWO technologies called:
Active X - to interact with the Microsoft site. The first time you visit the Update website, using your profile, you are asked if you will accept the Windows Update Control Package (the Active X control) onto your machine.
SSL (Secure Socket Layer) - A method of data encryption used by Internet Explorer.
Now this general error message 0x800A138F, that some folks get when they visit Windows Update, has been around for a while. BUT, when the MSBlast virus was unleashed Microsoft changed a few things at the main update website. One of them was to use Akamai for additional bandwidth and this connectivity is exclusively using HTTPS (SSL) for the downloading of the update catalogue. It is since then that we have seen an escalation in the number of 0x800A138F error messages!
TIP:
The following steps will help many of you... BUT
What would be REALLY helpful to anyone trying to support you, is if you go to the "Windows Update Log" and look for any "Errors". This gives a clearer indication as to the exact nature of the problem. (The 0x800A138F error message is a "General" error THE real error number is in the log. A list of possible error messages is in a table at the bottom of this page.)
The windows update log is in the following places:
C:\Windows\Windows Update.log (Win XP & Win98/Me)
C:\WINNT\Windows Update.log (Windows 2000)
Just copy and paste the above in Windows Explorer to open the log file...
NB -
If YOU GET ERROR 0x8007007E click here for a separate article...
If YOU GET ERROR 0x800B0004 click here for a separate article...
If YOU GET ERROR 0x800C0008 Try Step 4 and 5...
If YOU GET ERROR 0x80190190 Go To Table at the end of this page...
If YOU GET ERROR 0xC00CE55F Go To Table at the end of this page...
If YOU GET "Error 0x80070057: The parameter is incorrect" PLEASE go to the end of this article and read the email sent in by Hans Lenzen!
NB - Fellow IT professional's, please do not send me emails complaining that this article is not what YOU would do etc... ALL of the fix's below have worked for folks getting the error message 0x800A138F...
Here's how to try and fix the 0x800A138F problem:
Some of the steps here may seem a little odd. But hang in there with me! One of them should work for YOU! (Please read the Personal Comments at the end of the article. Here I share with you my own experiences of fixing error 0x800A138F...)
Let's start with the basics and then move forward one step at a time.... I have also included some recommendations from emails I have received, at the end of this article.
NB - If you are using or have been using any form of Anti Spy/Advert software try STEP 11 first! Also MANY folks have resolved this issue using STEP 5...
Step 1)
Delete Temporary Internet Files
There is a possibility of some corrupted files in your Temporary Internet Files (TIF) storage... So we need to clear out this folder.
To do so:
Start Internet Explorer.
On the Tools menu, click Internet Options, and then click the General tab.
Under Temporary Internet files, click Delete Cookies.
Click OK when you are prompted to confirm the deletion.
Click Delete Files.
Click OK when you are prompted to confirm the deletion.
Under History, click Clear History.
Click Yes when you are prompted to delete your history of visited Web sites.
Click OK.
Close Internet Explorer
Start Internet Explorer and try the Windows Update Site again.
If it fails with the 0x800A138F error again try Step 2
Step 2)
Check Security And Content Settings In Internet Explorer
a) Check the security settings for the Trusted sites zone in Internet Explorer.
To do so:
Open Internet Explorer, on the Tools menu, click Internet Options, and then click the Security tab.
Click Trusted sites, and then click Default Level. (This should be Low, these are sites you trust!)
Now click the Sites button.
Clear the check box "Require server verification (https
for all sites in this zone."
Type the following URL's EXACTLY as follows:
http://Windowsupdate.microsoft.com
http://V4.Windowsupdate.microsoft.com
https://v4.Windowsupdate.microsoft.com (Note: The https is correct)
http://Download.Windowsupdate.com
*.akamai.net (Note: Yes this really is correct!)
Type each one then, click Add, and repeat until they all show in the bottom box. Now click OK, and then click Apply.
TIP: It is also worth checking to make sure NONE of these URL's appear in the "Restricted Sites" section.... Some of the popular spy blocker type software can automatically place any URL in this section..
Clear the Secure Sockets Layer (SSL) state and AutoComplete history.
To do so:
(Windows XP Only...)
Open Internet Explorer, on the Tools menu, click Internet Options, and then click the Content tab.
Under Certificates, click Clear SSL State.
Click OK when you receive the message that the SSL cache was successfully cleared.
Under Personal information, click AutoComplete.
Under Clear AutoComplete history, click Clear Forms. Click OK when you are prompted to confirm the operation.
Click Clear Passwords. Click OK when you are prompted to clear all previously saved passwords, and then click OK two more times.
Close Internet Explorer
Start Internet Explorer and try the Windows Update Site again.
If it fails with the 0x800A138F error again try Step 3
Tip:
You can test your ability to connect to Secure Sockets Layer (SSL) websites by using this SSL test site...
Step 3)
Verify that Internet Explorer is configured to use SSL 2.0 and SSL 3.0.
To do so:
Open Internet Explorer
On the Tools menu, click Internet Options, and then click the Advanced tab.
In the Settings box, under Security, click to select the Use SSL 2.0 and Use SSL 3.0 check boxes (if they are not already selected), and then click OK.
Now Close Internet Explorer
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 4
Step 4)
Please uncheck "Check for server certificate revocation":
Open Internet Explorer
Click on Tools
Click on Internet Options
Click on the Advanced tab
Scroll down to the Security Section
Unselect "Check for server certificate revocation"
Reboot the machine
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 5
Step 5)
Verify that the Date and Time Settings on Your Computer Are Correct
You are most likely seeing the error code 0x800C0008 in the update log. This usually indicates a date error. Another symptom will be not being able to visit checkouts online, login to secure banking etc...
Because SSL certificates have an expiry date, if the date on your computer isn't correct, it may prevent you from connecting to secure sites. To verify that your computer is configured with the correct date and time settings:
Click Start
Click Control Panel
Click Date, Time, Language, and Regional Options,
Click Date and Time
Select the Date & Time tab
Check to make sure that the date and time settings are configured to use the current date and time, and then click OK
(NB - You could also check your date/time in the CMOS - on start up.....)
Now open Internet Explorer and try the Windows Update site again. You may be surprised to hear that this is the NUMBER ONE reason folks tell me was stopping them accessing the site!!!
NB - If you have error 0x800C0008 and the date is NOT your problem, then copy and paste the following into your browser, hit enter, let the page load then close and reboot, then try the Update website again:
https://a248.e.akamai.net/v4.windowsupdate.microsoft.com/getmanifest.asp
If it fails with the 0x800A138F error again try Step 6
Step 6)
Now I said earlier that some of the suggestions were a little odd... Well...
The error may occur because the language-setting in Internet Explorer is missing.
To add a language, in Internet Explorer:
Open Internet Explorer
Click on Tools
Click on Internet Options
Click on the General tab and click the "Languages" button.
Add a language to the list if empty.
Now click OK and then OK and close Internet Explorer
Or.....
In some reported cases you have to add a second language, English-United States, and move it to the top of the list!
Side Note:
(NB - For those of you wondering why this may happen. Well the file that contains your Update History is called iuhist.xml, and there is a known bug where the Send method of XMLHttp on XML 2.6, or later, fails with error code 0x800A138F if there are no languages specified in Internet Explorer.)
--------------------------------------------------
From: Koos
Sent: 17 October 2003 09:01
To: marc
Subject: Error 0x800A138F
Dear Marc,
When updating my Windows XP I got Error 0x800A138F. Through Google
I came to Updatexp.com and found the answer.
Step 6 did the trick for me (language setting)
As You said in the article, I is indeed odd. as the standard language is Dutch.
Afer adding Duch in the empty list I was able to Update again.
Many thanks!!!!!!
With regards,
Koos
REBOOT Then open Internet Explorer and try the Windows Update site again!
If it fails with the 0x800A138F error again try Step 7
Step 7)
Temporarily disabling antivirus and firewall programs while you use Windows Update may solve this problem. Be sure to enable them again when you complete the update process...
It is also worth noting that the new Active X control, used by V4 of Windows Update, collects patch information and sends/receives that information over port 443, instead of port 80 as in the past...
If you have port 443 blocked at your router/firewall then try unblocking it.
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 8
Step 8)
You might also be able to resolve this issue by deleting all of the content in:
Program Files\Windowsupdate
and
Program Files\Windowsupdate\V4 (except for the iuhist.xml file located in Program Files\Windowsupdate\V4)!!!
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 9
Step 9)
Verify that Internet Explorer Is Using 128-Bit Encryption
Internet Explorer High Encryption comes with Internet Explorer 5.5 and above. It provides you with 128-bit encryption, the highest level of protection Microsoft can offer for your Internet communications, including credit card use and financial transactions.
There have been some occasions when the Cipher Strength appears as 0 in Internet Explorer. This can occur if the Schannel.dll, Rsabase.dll, or Rsaenh.dll files are missing, damaged, or of the incorrect version.
To check you have 128-Bit:
In Internet Explorer, on the Help menu, click About Internet Explorer
The level of encryption on your computer appears next to the words Cipher Strength. Verify that the Cipher Strength value appears as 128-bit
If it does then close the window. If it shows 0-Bit then you are going to have to repair the damaged files...
Please read:
How to Reinstall or Repair Internet Explorer and Outlook Express in Windows XP Click Here
Now open Internet Explorer and try the Windows Update site again.
Marc,
Thanks so much for your help. I've been waiting over a week to hear from Microsoft and you fixed me up on Step 9. I never made the connection that Windows Update started failing after I updated to IE5.5 SP2... never saw an error or anything but the IE5.5 Help -> About Cipher was indeed set to 0-bit. I updated to IE6 SP1 (seemed like the easiest way) and BINGO!, Update is working like a champ.
Definitely a superior site.
Thanks again,
Don, USA (Windows 98SE User)
If it fails with the 0x800A138F error again try Step 10
Step 10)
Verify that Internet Explorer Proxy Settings
If YOU are using a Proxy Server to access your Internet content, or even if you are not sure.
Do this:
Open Internet Explorer
Click on Tools menu
Click on Internet Options
Click on the Connections tab and click the LAN settings button
Click Advanced and make sure there is a tick in the box next to:
"Use proxy server for all protocols."
Click OK and close Internet Explorer
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 11
Tip:
Also, if you are using some software called SPYBLOCKER, disable it and try windows update again..
AOL users Tip:
If you use AOL. Try minimising the AOL browser (once connected) and then open Internet Explorer and visit Windows Update!
Tip:
Hi Marc,
Well done. What you have posted has certainly been needed, a clear and
concise guide to what could be causing the problem and understandable by
beginners.
I had already got my system sorted by removing a248.e.akamai.net from the Hosts file via Spyblocker but it became obvious there was a lot more going on than simply that and you have done a great job in covering everything else.
Thank you,
Reg (UK)
Tip:
Marc,
I have Norton System Works and I went into that program to delete my cookies, all of them like you said in your instructions. I then went to the Update website and it prompted my to download a security warning and then it scanned my system and gave me my updates to chose from.....
It's finally fixed.
Thank you for your help.
Renee (USA)
Tip:
Thanks Marc,
That did the trick... I deleted the security certificate as you suggested and visited the address you gave me. It asked if I wanted to accept the certificate and I said yes. I then restarted Internet Explorer and Windows Update worked!
I have been pulling my hair our for 2 weeks trying to solve this.
Thank you for your patience with me.
Davina (USA)
Step 11) New!
Check The Hosts File...
There is a small file on your machine that MAY be causing you a problem...
Lets check it out:
Go To The Hosts File::
C:\WINDOWS\SYSTEM32\DRIVERS\etc (Windows XP)
C:\WINNT\SYSTEM32\DRIVERS\etc (Windows 2000)
C:\Windows\Hosts (Windows 98)
Use Notepad to view contents of the Hosts file.
(The Hosts file is a editable using notepad)
The lines at the beginning with # in the first column - IGNORE
If there are ANY entries in there that refer to Microsoft or to Akamai DELETE them!
Now close notepad accepting the changes.
Now open Internet Explorer and try the Windows Update site again.
If it fails with the 0x800A138F error again try Step 12
Dear Marc,
Thanks for the solution! It was the hosts file - I used to use Spyblocker, but removed it several weeks ago...
Thanks, John (UK)
READ THIS Side Note:
This email demonstrates an IMPORTANT point...
Many of the current "Anti Spy" and "Ad-Aware" software CAN update your hosts file and BLOCK access to the Windows Update site. This is because Microsoft are now using servers at Akamai for load balancing of the service. However, Akamai servers have also been known to host the services of companies that "Anti Spy" software seeks to block. So we have a problem now Microsoft are using Akamai....!
ALSO at least one of these software programs will add the Akamai URL to the Restricted Sites in Internet Explorer - so this may be a problem too...
So delete any references to Akamai there also:
Open Internet Explorer, on the Tools menu, click Internet Options, and then click the Security tab.
Click Restricted sites, Now click the Sites button.
REMOVE any URL's that have akamai in the address.
Step 12) New!
??? An Un-related Internet Explorer 6 Issue...
Internet Explorer 6 (and 6 SP1) has been known to suffer from an issue where a new windows will not open.
I have now seen TWO reports where this has fixed the Windows Update issue, (sadly I do not know the error message in the windows update log), and so offer it here:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following commands, pressing the ENTER key on your keyboard after each line:
regsvr32 urlmon.dll
regsvr32 shdocvw.dll
regsvr32 msjava.dll (Some of you may not have this one... That's OK)
regsvr32 mshtml.dll
regsvr32 browseui.dll
Now type the word: exit and the window will close.
Now Reboot and try and Microsoft Windows Update again....
If it fails with the 0x800A138F error again try Step 13
Step 13) New!
Delete The Akamai Certificate...
There is a possibility of the Akamai security certificate causing problems.
Follow this:
Start Internet Explorer.
On the Tools menu, click Internet Options, and then click the Contents tab.
Click Certificates, click the Other People tab.
Click on the certificate called a248.e.akamai.net, click the remove button. (If not there then this is not your problem - close all windows.)
Click OK when you are prompted to confirm the deletion.
Now Close the open windows and Internet Explorer.
Start Internet Explorer and paste the following into the address:
https://v4.windowsupdate.microsoft.com/getmanifest.asp
When the Security Warning window appears click View Certificate.
On the the General tab, click Install Certificate
Click Next when the wizard window appears, keep the default setting ticked "Automatically...."
Click Next, Click Finish.
Close the open windows, accept the Security Alert that is still displayed by clicking Yes
Close Internet Explorer
Start Internet Explorer and try the Windows Update Site again.
If it fails with the 0x800A138F error again try Step 14
Well Step 14 is the one that fixed it for me!
--------------------
I has so many emails about the error message that I decided to see if I could "Break" windows Update on one of my machines and then "Fix" it....
On a brand new build of Windows XP Professional SP1 I visited the Windows Update site for the first time - via Internet Explorer > Tools > Windows Update.
I got the message about the Windows Update control and ALL was fine! No problems with Windows Update at all... I was upset! I wanted it not to work, so how to break it.
Well many posts in the various newsgroups mention that their Windows Update log files have been containing error messages referencing "akamai.net"
So i decided to point my browser at the secure site:
https://V4.Windowsupdate.microsoft.com
and not the default:
http://V4.Windowsupdate.microsoft.com
that I was always being taken too....
THAT DID IT!
Error 0x800A138F on the first try..
My Windows Update log showed the entry:
--------------------------------------------------------------------------------
Error IUENGINE Querying software update catalog from
https://a248.e.akamai.net/v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0008)
-----------------------------------------------------------------------------------------------------
Now ALL I had to do was fix it
Well I tried ALL the step above and NOTHING worked!!! Not a single step!
So I then thought about the cryptographic service error issue that I have previously written about in another article. So I ran the batch file I had made for that and I was FIXED...!!!
So, you could try:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following commands, pressing the ENTER key on your keyboard after each line:
net start cryptsvc
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 cryptdlg.dll
Now type the word: exit and the window will close.
Now Reboot and try and Microsoft Windows Update again....
NB - If you just can not face typing all that in the command line, simply download this batch file I have made and run it on your machine... It will do the typing for YOU!
---------------------------------------------
IMPORTANT: This article will cure the 0x800A138F problem for many of you. If YOU tried something else that worked - email me the fix and I will post here on this page... Contact Me
Below are some suggestions form site visitors!
You may also find these error codes useful - for future reference, especially when trying to figure out error messages in the Windows Update log! (They are only given here as a guide to general problems and will require further research on your part to resolve the particular problem you may be having.)
Hexadecimal error number Description
0x800C0002, 0x800401E4 and 0x80072EE5 The address of this site is not valid. Check the address and try again.
0x800C0003 Cannot start an Internet session.
0x800C0004 and 0x80072EFD Cannot connect to the Internet server.
0x800C0005 Cannot locate the Internet server or proxy server.
0x800C0006 and 0x80072EFC The site reports that the item you requested could not be found. (HTTP/1.0 404)
0x800C0007 The Internet site reports that a connection was established but the data is not available.
0x800C0008 Cannot download the information you requested. (This is an incorrect date on your PC or a server certificate revocation!)
0x800C0009 The item you requested requires proper authentication. (HTTP/1.0 401)
0x800C000A The Internet site cannot return the object you requested. (HTTP/1.0 403)
0x800C000B and 0x80072EE2 The connection to this Internet site took longer than the allotted time.
0x800C000C The site reports that the request is not valid.
0x800C000D and 0x80072EE8 The required Internet protocol is not installed on your computer, or the Internet address you requested may not be valid.
0x800C000E A security problem has occurred.
0x800C000F and 0x800401EA Cannot open the specified file.
0x800C0010 Cannot start the program needed to open this file.
0x800401E6 and 0x80040154 No program is registered to open this file.
0x80004004 The hyperlink cannot be followed to the destination.
0x801901F8 The transfer request timed out while waiting for a gateway. Resume the job at a later time. (HTTP Error 504)
0x801901F7 The service is temporarily overloaded and cannot process the request. Resume the job at a later time. (HTTP Error 503)
0x80190190
Proxy Error: Host name not recognized or host not found (HTTP Error 400) Download this patch, install, reboot and try again. Q823718
If that fails: Open regedit and go to the following key.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
Now look in the right pane and see if there is a sub-key there named
"VersionNumber" If the "VersionNumber" sub-key exists, delete it.
0x80190194 The requested URL does not exist on the server. (HTTP Error 404)
0xC00CE55F [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
"fipsalgorithmpolicy"=dword:00000001
switch it off with:
"fipsalgorithmpolicy"=dword:00000000
(For Windows 2003 and XP only... Windows 2000 does not fully support FIPS and so does not have this key.)
So in closing it seems that the configuration changes that have been made to the windows update service recently:
The client request used to be: (taken from Windows Update log file)
Querying software update catalog from
https://v4.windowsupdate.microsoft.com/getmanifest.asp
Now it is:
Querying software update catalog from
https://a248.e.akamai.net/v4.windowsupdate.microsoft.com/getmanifest.asp
(Akamai now provides "front end" load balancing for many of Microsoft's servers, plus they handle most of their streaming video services too...)
This does seem to Actually prevent the transfer of the update files you need, if those computers are "behind" some types of routers, firewalls or proxy servers too..... as well as the issue with hosts files mentioned in Step 11.
Microsoft are actively looking at this issue! BUT there is no quick fix available. If the suggestions on this page do not help, check with your vendors/IT support about updating any router firmware or firewall software. But this may not be practicable!
-------------------------------
You can MANUALLY download any updates you need by visiting: Manual Update
Then click Find updates for Microsoft Windows operating systems
Select your Operating System
Select the patches
Download your selections...
NB - For more experienced Windows XP users you may consider using the free HFNetChk tool to manually inspect your PC and then get a list of updates you are missing! (as well as all that are correctly installed.)
You can then use the Manual Update to get the patches you need... More on the HFNetChk tool in this article.
------------------------------
On a separate issue, that caused problems for MANY AOL and RoadRunner (Time Warner) customers using their Dial Up and Cable services. It turns out that for several days these ISP's had been doing some work on the "routing tables" (used to access websites...) and this had hit millions of users!
However, an unnamed Microsoft source says that it was due to AOL removing access to an important link to the internet, which then caused a bottle neck and so many of you could not access many of the Microsoft sites including Update and Hotmail services....
Who to believe???
What is a little worrying is that AOL describe their resolution to this issue as a TEMPORARY one... Does this mean there are going to be more outages soon.....?
----------------------------------
6th September 2003 - This fix came in from a Windows 98SE user:
Dear Marc
Like thousands of others, I also was unable to use Windows Update. Reading your article didn't solve the problem directly, but gave me enough hints to FIX THE PROBLEM !! Thanks...
Here's what I found and how I did it. The PC in question is running Windows 98SE, and was last successfully updated on 8/2/03. Your article suggested checking the file Windows Update.log, which I did, and I noticed that files referenced there start with "iu", e.g. iuengine. A quick search turned up the file "iuident.txt" in the "c:\program files\windowsupdate\V4" folder. This file is also in the file "iuident.cab".
However, there was another copy of "iuident.cab". in the folder "c:\program files\windowsupdate\V4\temp", and an inspection of the "iuident.txt" file in it revealed that it was a newer version than the other one. This newer copy referenced
[IUControl]
ControlVer=5.4.3790.14
ControlVerAnsi=5.3.3790.13
and also included
[IUServerURLs]
ServerCount=2
Server1="http://v4.windowsupdate.microsoft.com/"
Server2="http://a248.e.akamai.net/
Both of these items were mentioned in your article, which helped me ID the solution - simply replacing the original version of "iuident.txt" dated 01/29/03 with the newer one dated 08/28/03, as well as replacing the older version of "iuident.cab" in "c:\program files\windowsupdate\V4" with the newer one in "c:\program files\windowsupdate\V4\temp". After doing that, Windows Update flew by without a hitch. I hope this bit of info can be of help to you and your readers.
Regards
Doug (USA)
------------------------------------------------------------------------
Another user emailed me:
From: Bruce
Sent: 17 October 2003 08:20
To: marc
Subject: suggestion for Microsoft update 0x800A138F error
I found that clearing the akamai references from the hosts file (step
11) did solve my problem temporarily, but the next time I restarted the
computer or Spyware blocker (Spyblocker) it reset the hosts causing the
problem anew. I found it just as effective, easier, and protected my
system better if I deactivated Spyblocker just before performing an update
and restarting it when complete. It does not allow completely unattended
updates, but has it's advantages.
Thanks again for the help.
Bruce
------------------------------------------------------------------------
From a W2K user:
From: - EStaticD
Sent: 07 October 2003 19:06
To: marc
Subject: *A138F error when trying to update via windows update
Found a fix that is not on your site. It was listed on google a few
results below yours.
If you receive the subject error while visiting Windows Update:
01. Start / Run / regsvr32 iuctl.dll /u / OK to un-register the library.
02. Use Start / Search to search for Files and Folders. Type iuengine.dll, iuctl.dll into the file search box.
03. Delete all occurrences of these two files, deleting the ones in %SystemRoot%\System32 last.
04. Re-visit Windows Update.
BTW: Nice site!
Regards,
Wayne
-------------------------------------------------------------------------------
And another! (0x80070057)
From: Hans Juergen Lenzen (Germany)
Sent: 14 October 2003 13:53
To: marc
Subject: New fix for 0x800A138F / 0x80070057 found
Hello,
We had a problem with windows update (0x800A138F) and in .log there
was the error 0x80070057 ("falscher Parameter" / "wrong parameter".
None of your ways caused any reaction and helped anyway.
It took us 5 month to find the reason.
Today found out, what the problem was: the printer drivers of our new
OKI printers C5300 and 4200 have a DriverDate in the registry that
causes the "wrong parameter" error. I just changed the date (reg_binary)
to 00 00 00 00 00 00 00 00 and our windows update works perfectly.
I found the drivers (2 or three) in
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windo
ws NT x86\Drivers\Version-3\OKIxxx (search for PS5UI.DLL).
I did not notice any problems putting all to zero, perhaps when I will install an update
for the drivers there my be some trouble - but I do not think so.
I found the same drivers in ...\version-2\OKIxxx, but there the date was
already set to zero.
I hope this will help you to make your information more complete.
Thanks for making that page - it is very good although it did not help me!
Greetings
Hans Juergen Lenzen
Reply email:
Hi,
something more:
the issue occurs only with the old (beginning 2003) OKI postscript driver. If you install the new driver downloaded from OKI website, there is no more problem.
I do not know if I told you: Win XP has the same problem and you can solve it the same way.
Greetings
Hans Juergen Lenzen
From Updatexp.com:
Yes, this is a known error! ALL The driver dates should be in this format:
eg: xx/xx/xxxx reg sz
and not
reg binary. eg: 00 10 00 01 11 01
Intsall the latest drivers on your machine and this should resolve the problem. If you just try and uninstall the printer it will leave behind the data in the registry and you will still have the problem!
This 0x80070057 error is very common with old OKI printer drivers.
But it can also occur:
a) If you have a Lynx device (mainly audio cards) there may also be an issue with the way the date has been written to the registry key.
1. Click on Start, Run and type "REGEDIT" (w/o the quotes). The Registry Editor will open.
*WARNING*
Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
2. Navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0020
3. change date from August 16, 2000 to 8/16/2000
This should resolve the problem!
b) If you are using NetOp Software on your PC. This appears to be an issue with the Netop entering a driver entry into the enum\root\unknown key in the registry.
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{63C35530-D3DF-11D3-8F5D-0060B0A3612B}\0000]
"ProviderName"="Danware Data A/S"
"DriverDesc"="NetOp Driver 3 ver. 7.00 (2002014)"
"DriverDate"="Jan 14 2002"
"DriverVer"="7.00 (2002014)"
"MatchingDeviceId"="danware_netop_driver3"
Both the DriverDate and DriverVer are not formatted properly!
Visit
http://www.netop.com/tech/download/fix/fixwinup.exe and run this executable If you are running the Netop software and getting this error.
Regards
Marc Liron -
www.updatexp.com
Some more recent emails to my site:
------------------------------------------------------------------------------
From Sweden:
From: Ove Hagerbo
Sent: 10 October 2003 08:28
To: marc
Subject: SV: Installing the KB828750
Marc,
The 0x800A138F problem was solved by removing the affected user from the
Control Panel; Users and Passwords and then adding the name back again.
Rgds
Ove
---------------------------------------------------------------------------------
From the USA:
From: Johnny
Sent: 20 October 2003 14:53
To: marc
Subject: New fix for - Windows Update Failure - Error Code 0x800A138F
I was about half way through your great tutorial on fixing the problem, when
I remembered that I had just installed AOL 9.0 optimized on my
computer a day or two ago. I am on a university network and I don’t even
use AOL.
I put in on my computer so my family can use it when they come
to visit. Nothing had worked so far, so I tried removing AOL 9.0 and then
windows update worked great. I have no idea what AOL 9.0 does
but it is definitely what was causing my windows update not to work.
Hopefully this might help someone. Thanks for the webpage.
Johnny
----------------------------------------------------------------------------------
From France:
From: David
Sent: 1st November 2003 19:07
To: marc
Subject: Code 0x800A138F
Thanks for your page.
I got Windows Update working again by re installing IE6 SP1 and the Active X control's.
David
-------------------------------------------------------------------------------
From Belgium:
I had tried all the suggestions from
www.updatexp.com/0x800A138F.html that I had not already
thought of myself and it still didn't work. With nothing left to lose I went back to one of my secure sites, got the usual "Unable to display page" error.
Out of total frustration I selected the "Detect network settings" option and much to my surprise my PC went off and thought about things for 30-45 seconds.
After that the page came up!
---------------------------------------------------------------------------------
29th December 2003
From the USA
Just want to thank you for your Windows Update Fails 0x800A138F
fixes. Step #10 did it.
Since I was running a peer to peer network using Wingate for Internet
Connection Sharing and my Windows 98 machines were working fine (only my
Windows XP machines weren't working) step #10 seem the logical culprit and low
and behold it fixed it.
Thanks again.
Frank
---------------------------------------------------------------------------------
31st December 2003
From the Netherlands
Hi, thanks for your splendid page! I had this 0x800A138F problem on a
Windows Server 2003 system. (The Windows Update log listed error 0x800C0008.)
I tried lots of solutions found on your site and on
http://v4.windowsupdate.microsoft.com/troubleshoot/ until I found that the ONLY
solution that worked for me was disabling the server certificate revocation - your step 4.
Happy New Year!
Joep
---------------------------------------------------------------------------------
31st December 2003
From the USA
Thank you for this site, you have solved my windows update problem as
well as a problem I had in not being able to get to mail.yahoo.com for the past
3 MONTHS. In my case the issue was the hosts file. I removed all references to
akamai, windowsupdate, and yahoo.com, and now everything works just fine. If
this problem ever repeats itself with a different site I'll know where to look
now.
Thanks again,
Paul B.
-----------------------------------------------------------------------------------
Well I hope this "long" article was useful.. Make sure YOU sign up for my EXCLUSIVE FREE XP Newsletter for more tips and advice!
PLEASE note that I can no longer respond to emails asking for help on this issue. If I find any more "fix's" I shall post them here...
However I am writing a small booklet on how to "Trouble Shoot Windows XP" If you have anything you want to see in it then email me via: contact and I will add it to the list of ideas. Thanks!
-----------------------------------
Regards
Marc Liron
Contact Me
Sign Up For A GREAT Windows XP Newsletter!
From one of the most POPULAR
Windows XP Websites on the Net!
Windows XP News
Windows XP Tips
Patch Update News
Info on Internet Explorer and Outlook Express
Windows XP FREE Video tutorials...
And so much more......
First name
E-mail address
Don't worry -- your e-mail address is totally secure.
I promise to use it only to send you Update XPress
and special XP related bulletins.
Here is my site Privacy Policy
Scannow sfc New!
Learn how to use this useful troubleshooting tool in Windows XP - sfc /scannow
The views on this website are my own and not that of Microsoft.
I am not responsible for the content of any sites linked to.
ALL information is provided "As Is"
This page was last updated: 28th December 2003
Home Page | Main Article Index | FREE XP Newsletter | Contact Me
Does Windows Update Keep Giving You The Error 0x800A138F?
www.updatexp.com - Marc Liron - 2003
GL,
Ted
