Ok, i thought this might help peeps work around a few hardware difficultys.
Genrally there is no set rule, but after doing extensive reading and experimenting, ive found somit which works without errors.
ABIT KG7-RAID
Microsoft Windows 2000 Professional (SP2)
Thunderbird 1.4GHz [133MHz FSB]
GlobalWIN WBK68 cooler
Aopen HQ-08 case with 300W PSU
256MB Crucial PC2100 CAS2.5 [in DIMM 1 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
256MB Crucial PC2100 CAS2.5 [in DIMM 2 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
256MB Crucial PC2100 CAS2.5 [in DIMM 3 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
ATI Radeon 64Mb DDR VIVO [in AGP Slot]
Creative Labs SoundBlaster Platinum 5.1 [in PCI Slot 2]
3Com Etherlink XL 10/100MBit 3C905C-TX NIC [in PCI Slot 4]
1 x IBM 60GXP 60Gb ATA/100 [disk on IDE1 as Master]
1 x IBM 75GXP 60Gb ATA/100 [disk on IDE3 as Master using HPTxx.2.3.0]
1 x Plextor PX-W1610TA 16x10x40 CDRW [on IDE2 as Master]
1 x Pioneer DVD-106S 16xDVD 48xCD [on IDE2 as Slave]
PS2 keyboard
Optical PS2 Mouse
Iiyama Vision Master Pro 452 19" (0.25dpi) Shadow Flat DiamondTron monitor (1280x1024 32bit)
Motorola SurfBoard SB3100 Cable Modem
Ive been using this config for over a months now and ive never had a single problem!
Hope this helps someone out there with they config!
Genrally there is no set rule, but after doing extensive reading and experimenting, ive found somit which works without errors.
ABIT KG7-RAID
Microsoft Windows 2000 Professional (SP2)
Thunderbird 1.4GHz [133MHz FSB]
GlobalWIN WBK68 cooler
Aopen HQ-08 case with 300W PSU
256MB Crucial PC2100 CAS2.5 [in DIMM 1 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
256MB Crucial PC2100 CAS2.5 [in DIMM 2 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
256MB Crucial PC2100 CAS2.5 [in DIMM 3 - running at CL=2 - settings on Auto - DDR voltage at 2.75v]
ATI Radeon 64Mb DDR VIVO [in AGP Slot]
Creative Labs SoundBlaster Platinum 5.1 [in PCI Slot 2]
3Com Etherlink XL 10/100MBit 3C905C-TX NIC [in PCI Slot 4]
1 x IBM 60GXP 60Gb ATA/100 [disk on IDE1 as Master]
1 x IBM 75GXP 60Gb ATA/100 [disk on IDE3 as Master using HPTxx.2.3.0]
1 x Plextor PX-W1610TA 16x10x40 CDRW [on IDE2 as Master]
1 x Pioneer DVD-106S 16xDVD 48xCD [on IDE2 as Slave]
PS2 keyboard
Optical PS2 Mouse
Iiyama Vision Master Pro 452 19" (0.25dpi) Shadow Flat DiamondTron monitor (1280x1024 32bit)
Motorola SurfBoard SB3100 Cable Modem
Ive been using this config for over a months now and ive never had a single problem!
Hope this helps someone out there with they config!