Ricoh RW5125A won't burn DVD !

C

chewie

1
Hi,
I've just updated my OEM Ricoh RW5125A to firmware 1.64, but still can't get my DVD recorder to burn correctly !
Thank you for your help
Here is the log from Nero 6 :

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero version: 6.0.0.15
Recorder: < DVD+RW RW5125> Version: 1.64 - HA 1 TA 1 - 6.0.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW5125 >Version: 1.64 - HA 1 TA 1 - 6.0.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DJNA-372200 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVD+RW RW5125 atapi Port 1 ID 1 DMA: On
: EUSBMSD Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVD+RW RW5125 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 176MB (181156kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.9.2003
UDF/ISO compilation
15:56:09 #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

15:56:09 #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

15:56:10 #3 Text 0 File Isodoc.cpp, Line 5878
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

15:56:10 #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

15:56:10 #5 Text 0 File Reader.cpp, Line 118
Reader running

15:56:10 #6 Text 0 File Writer.cpp, Line 127
Writer DVD+RW RW5125 running

15:56:10 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

15:56:10 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

15:56:10 #9 Text 0 File Burncd.cpp, Line 3169
Turn on Disc-at-once, using DVD media

15:56:10 #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286415 (508:05.40)

15:56:10 #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

15:56:10 #12 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: DVD+RW RW5125, Media type: DVD+R

15:56:10 #13 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:56:10 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286416 (2286416) = #2286416/508:5.41
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286416 blocks [ DVD+RW RW5125 ]
--------------------------------------------------------------

15:56:10 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [ DVD+RW RW5125 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682887168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286416 | lead-out | 1 | 0x00 | 0x41

15:56:10 #16 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

15:56:10 #17 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

15:56:11 #18 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2.4x (3*312 KB/s)

15:56:11 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:56:11 #20 SCSI -1066 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A25000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

15:56:11 #21 Text 0 File DVDPlusRW.cpp, Line 1491
Set Booktype to DVD+R (10), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK

15:56:11 #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 23:51,444 (1431444ms) -> OK

15:56:11 #23 Text 0 File DVDPlusRW.cpp, Line 555
Start write address at LBA 0
DVD high compatibility mode: Yes

15:56:56 #24 SCSI -400 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03F30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0xC4
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x91 0xC4

15:56:56 #25 CDR -400 File Writer.cpp, Line 335
Unspecified target error

15:56:56 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:56:56 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:56:57 #28 Phase 127 File dlgbrnst.cpp, Line 1843
Generating DVD high compatibility borders

15:56:57 #29 SCSI -1066 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

15:56:57 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:56:57 #31 Phase 129 File dlgbrnst.cpp, Line 1843
Generating DVD borders completed successfully

15:56:57 #32 Text 0 File DVDPlusRW.cpp, Line 1491
Set Booktype to DVD+RW (9), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK

15:56:57 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:56:57 #34 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 2.4x (3*312 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 10:27:50 (Adapter

driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
S

scarecrow

1
Change the value of the last mentioned registry key to your logfile to 1 and try again. Seems to be a permissions problem. You should also disable auto insert notification, which is on.
 
C

chewie

1
how can i disable auto insert notification for my DVD write under Windows XP ?

scarecrow said:
Change the value of the last mentioned registry key to your logfile to 1 and try again. Seems to be a permissions problem. You should also disable auto insert notification, which is on.
Click to expand...
 
S

scarecrow

1
chewie said:
how can i disable auto insert notification for my DVD write under Windows XP ?
Click to expand...
Several ways to do that...
1. Click the Start button followed by selecting "Run". Type in "gpedit.msc" and click OK. Click and expand "Computer Configuration", followed by "Administrative Template", followed by "System". Double click "Disable Autoplay" and then select "Enable" followed by clicking "OK".
2. Type regedit and find the key
HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Policies\Explorer
Modify the value for the NoDriveTypeAutoRun key to 0000 95 00 00 00 (or 0x95 in Regedt32.exe). Exit regedit and restart Windows. If you are running Windows NT, Windows 2000 or XP you should also update your Emergency Repair Disk (ERD) after completing these steps.
3. Type regedit (again...)
Find the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdrom
and change the "autorun" value to 0 (zero).
Any of them should work OK.
 
You must log in or register to reply here.
Top