Problem with Stomp Record now

[Phil K]

Just installed this, and while both my DVD and CDR (a Liteon) are on the left identified correctly, it says they cant be found !!! How can I get around this to try this much praised prog out ?

 

[LTR12101B]

Uses the Prassi engine - later versions of which are now at
http://support.sonic.com/downloads/engine.asp

It might help, if your drives are too recent - "not found" might refer to its own capability for them

 

[Laz]

Are your drives still showing up as working in "Device Manager" Phil?

Even with the latest PX engine update some newer drives will not fully function proberly with RNM, the 52X LiteOn being one of them as it will only burn at "max.,med,min" but they should still show up on the LHS of the GUI, also is your ASPI layer shown as being OK too?

 

[Duracell]

if you have yellow marks on your drives in the device manager, then use Nero's Registry Checker to fix the Lower and Upper Filters registry entries;

Nero RegistryChecker
If the CD drives are not visable anymore after installing a software supporting CD recorders, there might be a problem with the CD drivers. The Nero Registry Checker is checking the installation of the drivers and correct them, if necessary.

Greetings from
Duracell


[edit:] download link fixed

 

[scarecrow]

Last Liteon fully supported is the 48X one(s). The 52X ones are not officially supported yet, but they should work with some limitations. Check the Sonic site regularly for PXengine updates.
And yes, use Duracell's utility above to correct some odd registry entries, and also install Feurio (absolutely harmless- does not install any driver, uses just Adaptec ASPI to initialize the devices, and it's a fullfeatured never expiring demo) and check if some program that you've installed in the past "forgot" to remove it's device driver during uninstall (in fact, most of them forget to do so- the reason is beyond my imagination).

 

[Phil K]

Are your drives still showing up as working in "Device Manager" Phil?

Even with the latest PX engine update some newer drives will not fully function proberly with RNM, the 52X LiteOn being one of them as it will only burn at "max.,med,min" but they should still show up on the LHS of the GUI, also is your ASPI layer shown as being OK too?

ASPI is 4.60. Used both duracells thing (and lost my Nero ! and the prassi engine with no change in record now.Still saying I have no cdrw. (But still listing it)
Used the registry checker again - and this time my NTI wont work ! (Having a fun time eh ?) Couldnt find my original Nero that came with the drive, either......

 

[woody]

Phil you got the Nero cleaning tool by accident.It removes all traces of Nero from your system.I will attach the registry checker here.Not sure if it will help.You might have to wait for a software update,or there could be other problems.

 

[Duracell]

ASPI is 4.60. Used both duracells thing (and lost my Nero ! and the prassi engine with no change in record now. Still saying I have no cdrw. (But still listing it)

mega sorry Phil K , something really stupid was happened, i had tried to link to Nero's Registry Checker (same like woody's attachment); but now as i rechecked the download link the target was _ftp://ftp6.nero.com/General-CleanTool_1135.zip; this is the Nero registry cleaner; now the only way to get Nero working is reinstalling;

so your to do list should be:
1. reinstalling Nero
2. run Nero's Registry Checker
3. run PXengine update again


please accept my apology
Duracell

 

[Phil K]

mega sorry Phil K , something really stupid was happened, i had tried to link to Nero's Registry Checker (same like woody's attachment); but now as i rechecked the download link the target was _ftp://ftp6.nero.com/General-CleanTool_1135.zip; this is the Nero registry cleaner; now the only way to get Nero working is reinstalling;

so your to do list should be:
1. reinstalling Nero
2. run Nero's Registry Checker
3. run PXengine update again


please accept my apology
Duracell

No problem mate. Just have to re-install it. No damage done.

 

[Mantra]

Stomp Record now
i need drivers for my new recoder(that is not supportated)

where can i download it?

 

[LTR12101B]

http://www.orlogix.com/support_download.php?type=updates&pn=rndx
PXEngine 507 here - not sure if Sonic are any further along (I saw mention of 509 somewhere)

 

[jbr]

For those with Liton 52s , replace the pxdrv.dll in your windows/system32 folder with the attached version , after you have run the latest pxengine update (which I believe is 507)

regards

jbr