problem making a vcd/svcd out of downloaded bin files

K

KEVIN88GT

New member
I have have downlaoded some bin files(movie), they are supposed to be SVCD's, however the only way I could actually watch them is to use intervideo WIN DVD4 by first mounting the bin image with DAEMON tools and then running an mpeg file in one of the directories on the cd (the directory is named MPEG2, and there are also 3 other directories that are called EXT, SEGMENT, and SVCD), the dvd player wont actually dedect it as being a cd (and obviously i tried it on my dvd player which does play svcd and vcd by byrning the bin to a cd and that didnt work either)

if anyone knows what I'm talking about and can please help me out I would really appreciate it.
 
Denexo

Denexo

1
How did you burned the bin file? as it is, as data cd? You can extract the mpeg file from the bin and burn it to cd as Super VCD.
 
K

KEVIN88GT

New member
I didnt burn the bin file onto the cd yet, i mounted the image on my hard drive using DAEMON tools (it's basically the same thing, except you dont waste CD's) and then i tried running the cd with a dvd player...
 
VIPER_1069

VIPER_1069

1
This may be a case of it being NTSC on PAL only system of PAL on NTSC !? ive had that problem but i can switch between modes on my standalone to resolve this :)
 
ChickenMan

ChickenMan

1
Just use IsoBuster to extract the MPG file from the AVSEQ01.MPG file (right click and select "Extarct but filter on M2F2 MPEG frames") and then burn to CD with VCDEasy as a SVCD.
 
K

KEVIN88GT

New member
ok i extracted the mpeg from the avseq01.mpg and when u use VCDeasy to try to burn to a cd as a svcd it saves it on my pc instead of actually burning it and sais there was a problem with my burner and to use..it tells me to use force driver, when i go to settings under force driver it sais default (also on the main screen under the choices for the cd writer I have several options two of them have my burner one sais 2,1,0 in front of it the other 3,0,0) any idea what i should do?
 
C

celtic_druid

1
2,1,0 would be sec slave. 3,0,0 would be on some kind of PCI card.

Could always just create a BIN/CUE and then burn with say Alcohol 120%.
 
PC-GUY

PC-GUY

1
celtic_druid said:
2,1,0 would be sec slave. 3,0,0 would be on some kind of PCI card.

Could always just create a BIN/CUE and then burn with say Alcohol 120%.
Click to expand...
I agree I find Alcohol to be the best to burn BIN/CUE files. :cool:
 
S

scarecrow

1
What's your burner? Some burners just refuse to be set by CDRDAO (VCDEasy's burning engine) at the proper MODE (typically mode2/2352) which is required for VCD's.
PC-GUY: Alcohol does not burn multisession bin/cue files, or single session ones with tracks using different MODE- and so it might fail burning some VCD's.
 
zver

zver

1
I downloaded many bin&cue movies.Why burn it you can mount and watch??Mount with daemon tools but use a good player like mpc which will work 100% with daemon tools,and just click on """open svcd:::-done :)
 
PC-GUY

PC-GUY

1
scarecrow said:
What's your burner? Some burners just refuse to be set by CDRDAO (VCDEasy's burning engine) at the proper MODE (typically mode2/2352) which is required for VCD's.
PC-GUY: Alcohol does not burn multisession bin/cue files, or single session ones with tracks using different MODE- and so it might fail burning some VCD's.
Click to expand...
WOW. :eek: I never had that problem. I've tried them in Alcohol's virual drive to see if they are worth burning then I use image burning wizard. I guess I'll know when it doesn't finishing burning, other wise how would you know? :confused:
 
K

KEVIN88GT

New member
my burner is an optorite CW4801 190E (when i go the the optorite site and try to d/l the latest firmware which is 210 E it wont let me flash my drive) I've been having so many prolems with this burner constantly freezing up and wasting tons of CD's that I think I'll get the Asus CRW-5232AS burner. I'll try burning my bin's with alcohol one more time... (any specific options I should have checked off?) and get back here with the results.

I also used nero to copy a bin file from my hard drive to a blank cd and the process failed at like 97%

Here is what the log said.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\NERO 6\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <OPTORITE CD-RW CW4801> Version: 190E - HA 1 TA 1 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 3 TA 0 - 6.3.0.3
Adapter driver: <d346prt> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC313000R atapi Port 0 ID 1 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : OPTORITE CD-RW CW4801 atapi Port 1 ID 1 DMA: On
DiskPeripheral : fasttx2k Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
IDE DVD-ROM 16X F: CDRom0
OPTORITE CD-RW CW4801 G: CDRom1
Generic DVD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (522936kB)
Free physical memory: 201MB (205968kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.4.2004
CD-ROM (ISO)
10:14:17 AM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:14:17 AM #2 Phase 72 File dlgbrnst.cpp, Line 1800
BURN-Proof activated

10:14:17 AM #3 Text 0 File Reader.cpp, Line 118
Reader running

10:14:17 AM #4 Text 0 File Writer.cpp, Line 124
Writer OPTORITE CD-RW CW4801 running

10:14:17 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:14:17 AM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

10:14:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 287622 ( 63:56.72)

10:14:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:14:18 AM #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: OPTORITE CD-RW CW4801;
CDR code: 00 97 24 15; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

10:14:18 AM #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:14:18 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 287623 (287623) = #287623/63:54.73
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 287621 blocks [OPTORITE CD-RW CW4801 ]
--------------------------------------------------------------

10:14:18 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [OPTORITE CD-RW CW4801 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 589359104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
287623 | lead-out | 1 | 0x00 | 0x41

10:14:18 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 287623 -> 287621.

10:14:18 AM #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

10:14:18 AM #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

10:14:18 AM #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

10:14:18 AM #17 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 32x (4,800 KB/s)

10:14:18 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:14:18 AM #19 Text 0 File Mmc.cpp, Line 19487
Set BUFE: BURN-Proof -> ON

10:18:33 AM #20 SCSI -1093 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x049C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x26 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

10:18:33 AM #21 CDR -1093 File Writer.cpp, Line 301
No seek complete

10:18:33 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:18:42 AM #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
OPTORITE CD-RW CW4801\H1 T1

10:18:42 AM #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

10:18:42 AM #25 Text 0 File Mmc.cpp, Line 14323
<OPTORITECD-RW CW4801 > start Close Session

10:18:45 AM #26 SCSI -1176 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

10:18:45 AM #27 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error

10:18:45 AM #28 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

10:18:45 AM #29 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

10:18:45 AM #30 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:18:45 AM #31 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 32x (4,800 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8/29/2002 2:27:50 AM (Adapter driver for rec)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 3/12/2004 11:41:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
S

scarecrow

1
@ KEVIN88GT :
1. Open your box and put the secondary IDE channel devices in reverse order- your burner is set as slave, which is a bad idea.
2. Get after that "Nero Burning Rights" and run it. Currently you don't have the right permissions to burn.
 
PC-GUY

PC-GUY

1
You need ASPI's!!!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 0 ID 1 DMA: On
CdRomPeripheral : OPTORITE DVD RW DD0401 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 1 DMA: On
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.0.162 , size=24576 bytes, created 1/27/2004 5:32:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 12:01:08 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 9/5/2003 6:28:56 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 10/1/2002 9:00:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Thats what it should look like!! Currently you don't have any ASPI drivers installed. Try this:Tips for beginners to CDR burning
<hr style="color: rgb(209, 209, 225);" size="1"> <!-- / icon and title -->
 
S

scarecrow

1
PC-GUY said:
Thats what it should look like!!
Click to expand...
Mixing Nero, RecordNow (pxhelp20, probably a Winamp pro5 module) and Roxio (cdralw2k- again probably a WMP9 module) is definitely a bad idea.
ASPI is useful, but not required by Nero, RecordNow and several other programs, plus that 4.71.0001 that you use is problematic.
Finally, with such security setting only administrators can use Nero to burn.
 
PC-GUY

PC-GUY

1
scarecrow said:
ASPI is useful, but not required by Nero, RecordNow and several other programs, plus that 4.71.0001 that you use is problematic.
Click to expand...
And so is windows but that works for me too. :rolleyes:
 
You must log in or register to reply here.
Top