shoarthing
New member
Hi - this is my first post here: mainly because I haven't yet activated - or, more to the point, sought to activate - this interesting new utility . . .
. . . why? - well, I test hardware, & I'm really concerned this main system here changes its hardware configuration enough that MalcomX will get fed up with the [potentially weekly] requests for new codes.
It's basically always a dual-CPU box using the same mobo/memory [pairs of CPU's change once every couple of months or so] with a couple of SCSI RAID-hosts with pretty longterm hardware constituents of/ID's to the arrays ; but the detailed configuration varies - has to vary - a lot: optical devices vary in number from 4 upwards - usually about a half-dozen, mostly SCSI on a fixed HBA. Only non-SCSI storage device is/are DVD-burner.
So; please might I ask for a very rough guideline [I know this has been done before, with AFAICS not much joy] on what I components I should try to fix for a few months so as to avoid always having to mail, then wait some variable & possibly frustrating time for a code?
- have done searches here to try to ensure this post isn't just a satisfactorily-answered repeat -
. . . why? - well, I test hardware, & I'm really concerned this main system here changes its hardware configuration enough that MalcomX will get fed up with the [potentially weekly] requests for new codes.
It's basically always a dual-CPU box using the same mobo/memory [pairs of CPU's change once every couple of months or so] with a couple of SCSI RAID-hosts with pretty longterm hardware constituents of/ID's to the arrays ; but the detailed configuration varies - has to vary - a lot: optical devices vary in number from 4 upwards - usually about a half-dozen, mostly SCSI on a fixed HBA. Only non-SCSI storage device is/are DVD-burner
So; please might I ask for a very rough guideline [I know this has been done before, with AFAICS not much joy] on what I components I should try to fix for a few months so as to avoid always having to mail, then wait some variable & possibly frustrating time for a code?
- have done searches here to try to ensure this post isn't just a satisfactorily-answered repeat -