pioneer a03 and a04
- Thread starter girovend
- Start date
RASTABT
1
A03 in short no! look at dis.
Specs
Write Support
DVD-R (4.7 GB for General disc only*), DVD-RW, CD-R, CD-RW
Read Support
DVD-ROM single layer/dual layer, DVD-R (all types), DVD-RW,
CD-ROM Mode1, CD-ROM XA Mode2 (form 1, form 2)
Photo CD (single and multiple session), CD-DA, CD-Extra, CD-R,
CD-RW (Supports AM2)
Write Speed
DVD-R 2X-CLV (2.76 MB/s), 1X-CLV (1.38 MB/s)
DVD-RW 1X-CLV (1.38MB/s)
CD-R 8X-CLV (1.41 MB/s), 4X-CLV (0.70 MB/s)
CD-RW 4X-CLV (0.70MB/
Also look here at full spec:> h**p://www.toddent.com/dvra03.htm
Specs
Write Support
DVD-R (4.7 GB for General disc only*), DVD-RW, CD-R, CD-RW
Read Support
DVD-ROM single layer/dual layer, DVD-R (all types), DVD-RW,
CD-ROM Mode1, CD-ROM XA Mode2 (form 1, form 2)
Photo CD (single and multiple session), CD-DA, CD-Extra, CD-R,
CD-RW (Supports AM2)
Write Speed
DVD-R 2X-CLV (2.76 MB/s), 1X-CLV (1.38 MB/s)
DVD-RW 1X-CLV (1.38MB/s)
CD-R 8X-CLV (1.41 MB/s), 4X-CLV (0.70 MB/s)
CD-RW 4X-CLV (0.70MB/
Also look here at full spec:> h**p://www.toddent.com/dvra03.htm
E
elpresidente
Guest
hmm...most time vcdhelp isn´t that good source for 100% correct info s .... but I think A03 +A04 r able to read +r/rw ... cause other drives (older ones) r also able to read -r/rw and +rw ..so why should A03/4 not be able to read it ? 
the easiest way to find out : test it ---- + post the result ...
üsse
the easiest way to find out : test it ---- + post the result ...
üsse