pioneer 107 will not write to DVD+R discs

H

harrymac

New member
My have a Pioneer 07 XLA will not write to DVD+R or +RW disc’s. When I try to write to these disc’s every thing goes fine until it fails on writing the lead out section on the disc. When I check the surface of the disc it appears from the change in colour that the main files have been burn onto the disc, Nero just refuses to write the lead out.

I have tried several different kind of disc at differing write speeds all with the same result, I have also updated o the latest firmware on the writer.

It has no problems with DVD-R or –RW which work perfectly.

Any one any ideas

Please don't double post!!! As adviced by PC-Guy, I have there for removed your double post on the same matter.
Thanks PC-GUY....

Rastabt :) 22 July 2004
 
PC-GUY

PC-GUY

1
First I'm coming to the conclusion that NERO sucks for DVD burning!!!! :eek: But getting back to your problem how about you do a search of your pc for your Nerohistory.log file and post it without your serial and then we can see whats going on. :)
 
H

harrymac

New member
O.k. and thanks for your time PC-Guy

Here’s a copy of last example of it failing.
====== *** NeroAPI, History File *** ======


WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 08:13:44
Nero API version: 6.0.0.0
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.16 - HA 0 TA 1 - 6.0.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 0 ID 1 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 680MB (697328kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.6.2004
 
PC-GUY

PC-GUY

1
I edited your post so everyone can see your log file with out downloading it. :)
Well I'd say start with updating Nero. Also you must have taken out to much of the log file cause it doesn't say the burn failed. :confused:
 
roadworker

roadworker

1
Update to the latest Nero ....according to your winaspi date and number,your version is rather old,lots of program bugs have been fixed in the meantime..;)
 
You must log in or register to reply here.
Top