RASTABT
1
40X/12X/48X CD-RW DRIVE LTR-40125SFeatures
ü 40X (Zone-CLV) Record, 12X (CLV) Re-Write & 48X
(CAV)Read technology.
ü E-IDE Interface, support up to Ultra-DMA mode 2.
ü Innovated SMART-BURN® technology to automatically
check media quality and set limit to burning speed to
ensure successful writing sessions & data retainability
(can be turned off)
ü Buffer underrun error free & automatically adjust writing
strategy plus running OPC to meet various burning
condition. (always active)
ü Innovated SMART-X technology, support up to 48X
speed Digital Audio Extration (DAE) and high speed VCD data extraction
ü Supporting Mt. Rainier ; Plug & Play ; Emergency manual eject
ü Supporting Fixed & Variable Packet, TAO, SAO, DAO, Raw Mode, Over-Burn.
ü Read/Write CD, CD-R, CD-RW Disc up to 99min. (Orange Book Part 2,3)
ü Easy-Tray® design for both horizontally & vertically use
ü Gear-Driven tray disc-loading mechaniasm to Improve reliability & life, no any belt-loose belt-broken issue.
ü VAS® Vibration Absorber System Mechanisam to reduce vibration & noise during read & write
ü Use Flash ROM supports internet firmware upgrade
Specifications
l Speed :
Recording 40X(6000KB/sec) Z-CLV (20X, 24X@8min, 32X@18min, 40X@53min)
Re-writing 12X High-Speed (1800KB/sec) CLV
Reading 48Xmax (7200KB/sec) CAV (20X~48X)
l Interface : ATAPI-E/IDE, support up to Ultra-DMA Mode2 33.3MB/sec
l Access Time : 80ms (typical)
l Buffer Memory Size: 2MB
l System Requirement : CPU Pentium 166MHz above , Memory 128B Required ;
HDD must have access time < 20ms, with a minimum of 100MBytes Free space
l Disc Format : CD/CD-R/CD-RW formats both 8cm & 12cm discs (up to 99 min)
l Operating System :
DOS 6.xx, Windows 95/98/NT/XP/2000/ME, OS2 Warp, Mt.Rainier
l MTBF : 70'000 Power On Hours with 25% Duty
l Audio:
S/N ¡Ù 75dB
Earphone ¡Ù 0.3Vrms @ 1KHz
l Temperature & Humidity:
Operating: 5C to 50C ; RH: 15% to 80% , Non-Condensing
Non-Operating: -40C to 60C ; RH: 15% to 90% , Non-Condensing
l Dimension :
WxHxD: 145.8 x 41.3 x 190.0mm
Weight: ¡Ø 1.0Kg
l Power Requirement:
DC + 5 V (+/- 5%, 100mVpp ripple) 0.9 A (max), 0.1 A (min)
DC +12 V (+/- 10%, 200mVpp ripple) 1.5 A (max), 0.1 A (min)
No smoke without fire!! chain smoker....
