NEC 1100 A doesn't recognize 4 speed anymore

C

Clinton

New member
Hello,

I have a NEC 1100 A and use Nero 6.0 with it to burn DVD's
Everything worked fine for about 3 months but since a week Nero
doesn't recognize 4 speed anymore and says that he only burns at 2.4 speed.
Can anyone tell me if i can reset the speed ?
I have already uninstalled Nero and re-installed but no luck.
Also other DVD programms will only burn at 2.4 speed and the Nec does not recognize 4 speed DVD's. (I have tried various DVD's)
The only thing i have done compared to the previous months is running system tool of nero express by mistake. Does that make sense ?
Please help.

Thanks in advance !

Clinton
 
Duracell

Duracell

1
Hi Clinton, Welcome to our forum! :)


Also other DVD programms will only burn at 2.4 speed and the Nec does not recognize 4 speed DVD's. (I have tried various DVD's)
Click to expand...
for sure this is a media incompatibility; try to udate NEC's firmware to latest release and use a trustable brand like Ritek G04;


--------------------------------
we would be glad, if you like to introduce yourself here: http://www.dvdrbase.com/forumdisplay.php?f=141

and please read our forum rules : http://www.dvdrbase.com/forumdisplay.php?f=58

also try the forum's search function: http://www.dvdrbase.com/search.php?
--------------------------------​
Greetings from
Duracell
 
C

Clinton

New member
Media

The media i use is the same i used for the last couple of months and they were all burning at 4 speed but somehow the burning programms don't recognize 4 speed dvd's anymore

Duracell said:
Hi Clinton, Welcome to our forum! :)



for sure this is a media incompatibility; try to udate NEC's firmware to latest release and use a trustable brand like Ritek G04;


--------------------------------
we would be glad, if you like to introduce yourself here: http://www.dvdrbase.com/forumdisplay.php?f=141

and please read our forum rules : http://www.dvdrbase.com/forumdisplay.php?f=58

also try the forum's search function: http://www.dvdrbase.com/search.php?
--------------------------------​
Greetings from
Duracell
Click to expand...
 
C

Clinton

New member
Re identifier

Tried it but no luck, programm couldn't determine speed etc and gave unknown error but thanks anyway.
The dvd i used were platinum and imation

Duracell said:
sorry, but i don't believe tey are the same; they only pretend to be the same but the retailer has switched to an other fabricator;
check it out yourself: < DVD Identifier >
Click to expand...
 
S

sabje26

New member
The same problem and more after firmware update

Hi there,

I've got the same problem, my Nec 1100a also doesn't recognize 4 speed DVD's anymore. I updated the firmware, now Nero recognizes 4 speed DVD's, but when I try to burn on 4 speed, it failes all the time. Can someone help me?
 
S

sabje26

New member
Problem solved for now

Hi, thanx for your reply!

Due to some problems with my other (Lite-on 812 S, won't copy any PS2 DVD backups anymore, CD and movies are fine) I updated my version of Nero. I now have version 6.3.1.17 and it seems that the problem is gone. I just burned 1 DVD at 4 speed, with no errors.

I wanna thank you for your reply, and I hope my burner keeps on burning on 4 speed.
 
S

sabje26

New member
Still have problems with my NEC, won't burn on 4 speed

Hi,

I thought the problems with my Nec were over, but unfortunately not... I burned one DVD without any problems at 4 speed, but now I'm still having the same problem again.

Nero recognizes it's a 4 speed disc, and it burns fine at 4 speed until it's finished and leading out, then I get several errors (see the log I attached).

Can somebody please help me with this problem?
 

Attachments

Duracell

Duracell

1
your log file is a horror story; :D

sabje26 said:
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
Click to expand...
configuring DVD writers as slave drives isn't recommended;
my recommanditation is: making the NEC master at the secondary IDE channel and the DVD-ROM (JLMS XJ-HD166S) should be the slave at the secondary IDE channel;



8:05:14 #21 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

8:05:14 #23 CDR -1106 File ThreadedTransferInterface.cpp, Line 1708
Power calibration error
_NEC DVD+RW ND-1100A\H1 T1
Click to expand...
typical sign for crappy/incompatible media; please have a look at this thread:
http://www.dvdrbase.com/showthread.php?t=40353



Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17-7-2002 8:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28-10-2003 12:02:00 (Prassi/Veritas driver for win 2K)
Click to expand...
v4.71 *vomiting* read there about the recommended ASPI version: http://www.dvdrbase.com/showthread.php?t=32137
and there about PXHELP20.sys: http://www.dvdrbase.com/showthread.php?p=228432
or here another PX example: http://www.dvdrbase.com/showthread.php?p=233370
 
woody

woody

1
Just wanted to add>on the fly with both devices on the same IDE channel is not a good idea either.Duracell has given good advice.Make sure you remove the conflicting software,and change the aspi layer.Nero has some clean.and registry repair tools at their website.Use them after you're done the changes.Good luck.
 
S

sabje26

New member
Thanx!

Hi,

Thank you very much for your replies! I'm gonna try everything you said, and let you know if it worked.

I'll be back :)
 
You must log in or register to reply here.
Top