Liteon 811S DVD-R/DVD+R Burning at 1x

M

MTB2002

New member
Hi, I have the above dvd writer and am using the Datawrite Red (V2) 4x DVD-R blank discs with Nero 6.
The problem is that I can only burn them at 1x. every now and then it will go to 2.4x.(about every 1 in 10 discs)
Ive done a few searchs and have DMA enabled... :confused:

Is there anything else I could try.....

Thanks...
 
PC-GUY

PC-GUY

1
Don't forget to leave out the big long number which is your serial which will be in the file a few times. :)
 
PC-GUY

PC-GUY

1
MTB2002 said:
Ok will do....../where will i get it from/ :( :confused: :(
Click to expand...
Well you don't say what OS you have but in XP you will find it in: C:\Program Files|Ahead\Nero and its called "NeroHistory.log"
Or you can try a search of your pc for just that file it will be a text file. :D
 
M

MTB2002

New member
Thanks very much.....please find att the log...hope this helps.
I posted it so we don't it as an attachments>>PC-GUY<<<<
 
Last edited:
PC-GUY

PC-GUY

1
Just post it like this it just make it nicer for everone to see it and I took out the other serials. :) I'll have a look and I will post back.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 15:03:36
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS06 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS1A - HA 1 TA 1 - 6.0.0.23
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90432D2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 98MB (101216kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2004
ISO compilation
18:16:08 #1 Text 0 File Isodoc.cpp, Line 6013
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:16:08 #2 Text 0 File Reader.cpp, Line 118
Reader running

18:16:08 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-811S running

18:16:08 #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

18:16:08 #5 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using DVD media

18:17:27 #6 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2187928 (486:12.28)

18:17:27 #7 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE

18:17:27 #8 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R
Disc Manufacturer: -
Disc Application Code: 0, Disc Physical Code: 0

18:17:27 #9 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

18:17:27 #10 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2187779 (2187779) = #2187779/486:10.29
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2187779 blocks [LITE-ON DVDRW LDW-811S ]
--------------------------------------------------------------

18:17:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [LITE-ON DVDRW LDW-811S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4480571392, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2187779 | lead-out | 1 | 0x00 | 0x41

18:17:27 #12 Phase 24 File dlgbrnst.cpp, Line 1803
Caching of files started

18:17:28 #13 Phase 25 File dlgbrnst.cpp, Line 1803
Caching of files completed

18:17:28 #14 Phase 36 File dlgbrnst.cpp, Line 1803
Burn process started at 2.4x (3,312 KB/s)

18:17:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:17:35 #16 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 13:34,774 (814774ms) -> OK

18:17:37 #17 Text 0 File DVDR.cpp, Line 1247
Recording mode: Sequential Recording Mode

18:17:38 #18 Text 0 File Mmc.cpp, Line 19359
Set BUFE: supported -> ON , Generic write control : ON

18:17:39 #19 Text 0 File DVDR.cpp, Line 1362
Start write address at LBA 0
DVD high compatibility mode: Yes

18:17:41 #20 Text 0 File Cdrdrv.cpp, Line 7883
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:17:55 #21 Text 0 File Cdrdrv.cpp, Line 1273
18:17:55.390 - LITE-ON DVDRW LDW-811S\H1 T0 : Queue again later

18:45:43 #22 Text 0 File WriterStatus.cpp, Line 113
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2187779 (216203h), lenght 0 blocks

18:45:43 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:45:44 #24 Text 0 File DVDR.cpp, Line 1565
EndDAO: Last written address was 2187791

18:46:23 #25 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

18:46:23 #26 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

18:46:23 #27 Phase 37 File dlgbrnst.cpp, Line 1803
Burn process completed successfully at 2.4x (3,312 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15:03:36
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Family
Home
1234567890

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 15:03:36
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS06 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS1A - HA 1 TA 1 - 6.0.0.23
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90432D2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 99MB (101608kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2004
ISO compilation
18:49:57 #1 Text 0 File Isodoc.cpp, Line 6013
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:49:57 #2 Text 0 File Reader.cpp, Line 118
Reader running

18:49:57 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-811S running

18:49:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

18:49:58 #5 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using DVD media

18:50:01 #6 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2187941 (486:12.41)

18:50:01 #7 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE

18:50:01 #8 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R
Disc Manufacturer: AN31 -
Disc Application Code: 64, Disc Physical Code: 193

18:50:01 #9 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:50:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2187792 (2187792) = #2187792/486:10.42
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2187792 blocks [LITE-ON DVDRW LDW-811S ]
--------------------------------------------------------------

18:50:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [LITE-ON DVDRW LDW-811S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4480598016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2187792 | lead-out | 1 | 0x00 | 0x41

18:50:02 #12 Phase 24 File dlgbrnst.cpp, Line 1803
Caching of files started

18:50:03 #13 Phase 25 File dlgbrnst.cpp, Line 1803
Caching of files completed

18:50:03 #14 Phase 36 File dlgbrnst.cpp, Line 1803
Burn process started at 1x (1,380 KB/s)

18:50:04 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:50:05 #16 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 13:34,779 (814779ms) -> OK

18:50:05 #17 Text 0 File DVDR.cpp, Line 1247
Recording mode: Sequential Recording Mode

18:50:06 #18 Text 0 File Mmc.cpp, Line 19359
Set BUFE: supported -> ON , Generic write control : ON

18:50:06 #19 Text 0 File DVDR.cpp, Line 1362
Start write address at LBA 0
DVD high compatibility mode: Yes

18:50:06 #20 Text 0 File Cdrdrv.cpp, Line 7883
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:50:13 #21 Text 0 File Cdrdrv.cpp, Line 1273
18:50:13.328 - LITE-ON DVDRW LDW-811S\H1 T0 : Queue again later

18:50:53 #22 Text 0 File Cdrdrv.cpp, Line 1273
18:50:53.343 - LITE-ON DVDRW LDW-811S\H1 T0 : Queue again later

19:46:30 #23 Text 0 File WriterStatus.cpp, Line 113
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2187792 (216210h), lenght 0 blocks

19:46:30 #24 Text 0 File Cdrdrv.cpp, Line 1273
19:46:30.531 - LITE-ON DVDRW LDW-811S\H1 T0 : Queue again later

19:47:10 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:47:10 #26 Text 0 File DVDR.cpp, Line 1565
EndDAO: Last written address was 2187791

19:47:45 #27 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

19:47:45 #28 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

19:47:46 #29 Phase 37 File dlgbrnst.cpp, Line 1803
Burn process completed successfully at 1x (1,380 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15:03:36
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Family
Home
1234567890

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 15:03:36
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS06 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS1A - HA 1 TA 1 - 6.0.0.23
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90432D2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 86MB (88332kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2004
ISO compilation
20:09:03 #1 Text 0 File Isodoc.cpp, Line 6013
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:09:04 #2 Text 0 File Reader.cpp, Line 118
Reader running

20:09:04 #3 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

20:09:04 #4 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using DVD media

20:10:48 #5 Phase 40 File dlgbrnst.cpp, Line 1803
Aborted by user

20:10:48 #6 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE

20:10:48 #7 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R

20:10:48 #8 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15:03:36
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Family
Home
1234567890

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 15:03:36
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS06 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS1A - HA 1 TA 1 - 6.0.0.23
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90432D2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-811S E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 132MB (135980kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2004
ISO compilation
 
M

MTB2002

New member
Just one more thing, don’t know if it makes any difference but, it’s the same thing if I 'copy on the fly' or straight from the HD.

PS your help is most appreciated
 
PC-GUY

PC-GUY

1
Well I see two things so far one is try a program like DVD Identifier to see who makes the media. For some reason Nero doesn't know who makes it which could mean its junk media. Also you could update nero and that could fix your problem. But tells us who makes the media cause you don't want to us junk cause you could find out in a little as six months your data could be unreadable. :eek: If nero doesn't know the media or its junk media Nero will burn at the lowest speed.
 
PC-GUY

PC-GUY

1
I found VIPER'S two cents on this media and I think he sums it up nicely.
VIPER_1069 said:
that will be your problem reds suck even these new so called better V2 that you have there!......

I recently got a pack to experiment with as they were sposed to be better than the old type datawrite reds i tested with my new 107 pioneer the results were variable from 1 or 2 that worked to the almost rest of the whole 25 pack being jittery and skipping on playback so i took them back to my puter store and they replaced them for some others and ive not had any problems since :)

my thoughts on DATAWRITE RED AVOID :)


try different media :)
Click to expand...
So I would say return that media and get some ritek G04 dye. :)
 
M

MTB2002

New member
Processor a Main Circuit Board b
1.50 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: TriGem Computer, Inc. Dublin
BIOS: Phoenix Technologies LTD 6.00 09/25/2001
Drives Memory Modules c,d
44.33 Gigabytes Usable Hard Drive Capacity
23.32 Gigabytes Hard Drive Free Space

JLMS XJ-HD166S [CD-ROM drive]
LITE-ON DVDRW LDW-811S [CD-ROM drive]
3.5" format removeable media [Floppy drive]

Maxtor 90432D2 [Hard drive] (4.32 GB) -- drive 1, s/n A20ED35C, rev GAS54112, SMART Status: Healthy
ST340810A [Hard drive] (40.02 GB) -- drive 0, s/n 3FB13BWV, rev 3.34, SMART Status: Healthy 256 Megabytes Installed Memory

Slot 'J6J1' is Empty
Slot 'J6J2' is Empty
Slot 'J7J1' has 256 MB
Local Drive Volumes

c: (on drive 0) 40.02 GB 22.13 GB free
d: (on drive 1) 4.32 GB 1.19 GB free


Done a disc frag about 4 weeks ago
 
M

MTB2002

New member
DVD Identifier Results with blank disc
[17:30:18] DVD Identifier V3.4
[17:30:18] Initializing ASPI/SPTI Drive Interface
[17:30:18] SPTI Drive Interface Successfully Initialized
[17:30:18] 1 Supported Drive Found (Out Of 2 Available Drives)
[17:30:18] Manufacturer Database [03-JUL-04@101$62] Loaded From File : (@101$62) Entries Found
[17:30:54] This Version Of 'DVD Identifier' Is Up-To-Date
[17:30:54] The Manufacturer Database Is Up-To-Date
[17:31:04] Waiting For Drive To Initialize Disc...
[17:31:15] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:31:49] Waiting For Drive To Initialize Disc...
[17:32:00] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:32:09] Waiting For Drive To Initialize Disc...
[17:32:20] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:35:01] Unable To Initialize Disc : Not ready - Medium not present [02/3A/00]
[17:35:04] Unable To Initialize Disc : Not ready - Medium not present [02/3A/00]
[17:35:04] Unable To Initialize Disc : Not ready - Medium not present [02/3A/00]
[17:35:24] Waiting For Drive To Initialize Disc...
[17:35:35] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:35:39] Waiting For Drive To Initialize Disc...
[17:35:50] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:35:56] DVD-R/-RW Medium Information Copied To Clipboard
[17:36:21] Waiting For Drive To Initialize Disc...
[17:36:32] Unable To Initialize Disc In Time : Not ready - Logical unit not ready [02/04/01]
[17:47:11] DVD-R/-RW Medium Information Copied To Clipboard



WITH FINALIZED DISC
--------------------------------------------------------------------------
Unique Disc Identifier : [DVD-R:INFOSMART01]
--------------------------------------------------------------------------
Disc Type : [DVD-R]
Manufacturer ID : [INFOSMART01]
Manufacturer Name : [Info Smart Technology]
Disc Application Code : [Unrestricted Use : Consumer Purpose]
Recording Speeds : [1x , 2x , 4x] (8x Cannot Be Detected)
Blank Disc Capacity : [2,298,496 Sectors = 4,489.3MB = 4.38GB (4.71GB)]
--------------------------------------------------------------------------
[DVD Identifier - http://DVD.Identifier.CDfreaks.com]
--------------------------------------------------------------------------
 
Last edited:
PC-GUY

PC-GUY

1
Tell you what I haven't used them but I do know that I've taking VIPER's word before and have never had a problem. So if VIPER said avoid I'm going to do just that.:) Most good place will take back junk media if they don't I wouldn't do business with them again. Try some RITEK G04s.
 
L

LTR12101B

1
HS06 ?? - that's a very old firmware revision, and if there's one thing Liteon do in later firmware, it's "match more media".

HS0Q is the latest official, and there were several inbetween

http://codeguys.rpc1.org/patchers.html - use at your own risk - not sure if there's anything the patcher can do for an 811s, actually!
 
You must log in or register to reply here.
Top