The Toe Cutter
New member
Ok I'm trying to backup my DVD-9 and followed the DVD decrypter/Shrink/burnatonce tutorial on this site to a Tee and its not working.
I get to the part in burnatonce where it asks to load the ISO file onto the main Gui. I choose yes and it starts to compile, 4,174 MB to be written, then it says in the dialogue box "write track data error after 0 bytes.
"Writing sucessful after o min & 18secs" What did I do wrong?
I'm using Sony DRU-510a with Verbatim dvd-r. Computer is plenty faster enough
Any help is greatly appreciated !!!
Here is what the command log said:
Cdrecord 2.0 (i686-pc-cygwin) Copyright (C) 1995-2002 J÷rg Schilling
Using libscg version 'rs-0.7t'
Track 01: data 4173 MB
Total size: 4793 MB (474:51.09) = 2136832 sectors
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 161664
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... Turning BURN-Free on
input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 2136998
CDB: 2A 00 00 20 9B A6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.008s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 10.705s
Average write speed 142.7x.
Fixating...
Fixating time: 0.002s
fifo had 688 puts and 1 gets.
fifo was 0 times empty and 0 times full, min fill was 100%.
I get to the part in burnatonce where it asks to load the ISO file onto the main Gui. I choose yes and it starts to compile, 4,174 MB to be written, then it says in the dialogue box "write track data error after 0 bytes.
"Writing sucessful after o min & 18secs" What did I do wrong?
I'm using Sony DRU-510a with Verbatim dvd-r. Computer is plenty faster enough
Any help is greatly appreciated !!!
Here is what the command log said:
Cdrecord 2.0 (i686-pc-cygwin) Copyright (C) 1995-2002 J÷rg Schilling
Using libscg version 'rs-0.7t'
Track 01: data 4173 MB
Total size: 4793 MB (474:51.09) = 2136832 sectors
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 161664
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... Turning BURN-Free on
input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 2136998
CDB: 2A 00 00 20 9B A6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.008s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 10.705s
Average write speed 142.7x.
Fixating...
Fixating time: 0.002s
fifo had 688 puts and 1 gets.
fifo was 0 times empty and 0 times full, min fill was 100%.
