Dvd-r Toshiba&intenso

K

KLY

1
I have the DVD-R TOSHIBA sd-R5002,and i try to burn my first dvd-r and 2...5,yes five dvd-r in the trash,i use dvd-r intenso,That is the problem?
 
E

elpresidente

Guest
hey mate ...we need a little bit more nfo ...
what happens ?
what software r u using..
etc....

greetz
 
K

KLY

1
the software:
-windows xp pro&home edition(2pcs)
-Record now max 4.5
-nero 55917
-primo dvd
-dvd decrypter 134
-gear 6.02
and...etc
 
RASTABT

RASTABT

1
KLY said:
I have the DVD-R TOSHIBA sd-R5002,and i try to burn my first dvd-r and 2...5,yes five dvd-r in the trash,i use dvd-r intenso,That is the problem?
Click to expand...
Ok KLY so you given us abit more info of your system....thanks.
Now we need to know some info....;) Like which program your using to burn with at the time, if the movie has been ripped to your hard drive, error message if any whats wrong with your final disk once burnt, reader etc etc... Thank you.:)
 
K

KLY

1
PC1:
Amd xp 1800
Board Msi k7n420 pro
Graphic card asus geforce 2 mx 7100 combo 32m
Disk Ibm ata 100 7200r 40g(master1)
Ram 256m 333mhz
dvd toshiba 16/40(slave1)
dvd-r toshiba sd-r5002(master)2
cdrw plextor 241040(slave2)
cdrw firewire Formaq 32x(liteon)
Sound card audigy player

PC2:
Amd 1800
Board Asus a7v333 with raid
Graphic card Msi g4 4200 128m ddr agp4x
Disk Ibm ata 100 7200r 30g
Ram 256m 333mhz
cdrw yamaha f1
cdrw ricoh mp7200a
sound card on board


Also i have a box firewire to put the dvd-rw drive,but i only try without the box.
 
K

KLY

1
The error log of Nero:
.
.
15049-21821-28429-51317-2593

Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17-07-2002 14:20:56
ahead WinASPI: File 'C:\Programas\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 25-06-2002 17:34:54
Nero Version: 5.5.9.17
Recorder: <TOSHIBA DVD-ROM SD-R5002>Version: 1031 - HA 1 TA 1 - 5.5.9.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1502>Version: 1012 - HA 2 TA 0 - 5.5.9.17
Adapter driver: <atapi> HA 2
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: ?
DiskPeripheral : IC35L040AVER07-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R5002 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1502 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W2410A atapi Port 2 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261492kB)
Free physical memory: 79MB (80968kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

20.1.2003
UDF/ISO compilation
17:15:07 #1 Text 0 File Isodoc.cpp, Line 7050
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

17:15:07 #2 Phase 111 File dlgbrnst.cpp, Line 1574
DVD-Video files sorted

17:15:08 #3 Text 0 File Reader.cpp, Line 115
Reader running

17:15:08 #4 Text 0 File Writer.cpp, Line 126
Writer TOSHIBA DVD-ROM SD-R5002 running

17:15:08 #5 ISO9660GEN -11 File geniso.cpp, Line 4485
First writeable address = 0 (0x00000000)

17:15:08 #6 ISO9660GEN -11 File geniso.cpp, Line 4485
First writeable address = 0 (0x00000000)

17:15:08 #7 Text 0 File Burncd.cpp, Line 3597
Turn on Disc-At-Once, using DVD media

17:15:08 #8 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2240375 (2240375) = #2240375/497:51.50
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

17:15:09 #9 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 2240374 (497:53.49)

17:15:09 #10 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

17:15:09 #11 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: TOSHIBA DVD-ROM SD-R5002;
CDRW code: 00 00 00 00; CD manufacturer unknown
ATIP Data: ?

17:15:09 #12 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder TOSHIBA DVD-ROM SD-R5002 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 293627904

17:15:09 #13 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2240375 (2240375) = #2240375/497:51.50
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2240375 blocks [TOSHIBA DVD-ROM SD-R5002]
--------------------------------------------------------------

17:15:09 #14 Phase 24 File dlgbrnst.cpp, Line 1574
Caching of files started

17:15:09 #15 Phase 25 File dlgbrnst.cpp, Line 1574
Caching of files completed

17:15:09 #16 Phase 36 File dlgbrnst.cpp, Line 1574
Burn process started at 1x (1.380 KB/s)

17:15:09 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1953
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

17:15:09 #18 Text 0 File Mmc.cpp, Line 16752
Set BUFE: supported -> ON

17:15:09 #19 Text 0 File Cdrdrv.cpp, Line 7293
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist

17:53:47 #20 SCSI -1135 File Cdrdrv.cpp, Line 1388
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02240000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x17 0x03 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

17:53:47 #21 DVDR -1135 File Writer.cpp, Line 334
Write error

17:53:47 #22 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

17:53:47 #23 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

17:53:47 #24 Phase 38 File dlgbrnst.cpp, Line 1574
Burn process failed at 1x (1.380 KB/s)

17:53:47 #25 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17-07-2002 13:53:02
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 20-11-2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
woody

woody

1
Okay..I'm no expert,but I see a medium error.It looks like it is writing the lead-in,then failing in the middle of the burn.Is this correct?Have you tried other media?A rewritable might be a good idea until you sort this out.

Are you trying on the fly copying?It appears so from the log.

What are you trying to copy?
 
roadworker

roadworker

1
On the "choose recorder" tab,check your burner's info,about what formats it supports......it's weird that it's listed in the logfile as dvdrom,it's possible that the dvd burning part isn't recognised by Nero....you can update Nero for free..
You have the aspi 4.71 crap installed,it's recommended to uninstall that 1,and replace it by the 4.60 version from the forceaspi package.......I know that Nero uses it's own,but 4.71 can mess up with that 1.......also check if the IMAPI burning service from XP is disabled...
And you can try other media off course...
 
zver

zver

1
Also if that nero is really your take that serial out of it,and if its not leave it so somebody can regit!!!!
 
T

The Postman

1
KLY said:
the software:
-windows xp pro&home edition(2pcs)
-Record now max 4.5
-nero 55917
-primo dvd
-dvd decrypter 134
-gear 6.02
and...etc
Click to expand...
2 much burningsoftware installed you must only use 1 or 2 progs its better.

example:
DaviDeo on Dvd or Pro or 2 good proggies to rip dvd and put it on one dvd.
And Padus discjuggler or stomp record now max 4.5
thats enough
:eek:

grtx The Postman:D
 
S

scarecrow

1
The logfile shows an obvious recorder problem with the specific media used- hopefully curable with a firmware update. See this:

Data in Burst Cutting Area (BCA) does not exist

For the moment you would rather stick to the media recommended by Toshiba- if none is available, then good luck- you will need it.
 
T

The1englishman

1
Just for your info, i have the same drive,and the same media, iam using nero also, and i havnt had any troubles what so ever,The only problem i have with the intenso media is that they wont burn at x2 but apart from that there fine,I also think you have way to much burning software instaled,and you should switch to aspi 4.60 .
 
K

KLY

1
I dont have all the software instaled at the same time,i only try.
How to' check the IMAPI burning service from XP is disabled...' and where i can find aspi 4.60(force aspi to xp)
Thanks to all.
 
You must log in or register to reply here.
Top