CyberMail Video Capture Card

[Johnny™]

i have a cybermail AV PCI video capture card but no software for it i am trying to find drivers for WinXP to make the card work here's the specs on it
Rockwell Bt878/879KHF Chipset.
* Full Motion Video Capture.
* DirectX support.
* Sizable capture up to 640x480 resolution.
* Supports 16, 24, or 32-bit color.
* Capture up to 30 fps.
* Supports NTSC, PAL, PAL N, and SECAM video and television standards as well as - ITU-TH.324 and H.26 compression and decompression standards.
* Two composite (RCA) inputs.
* One S-Video input.
i have tried a few diffrent drivers and cant seem to find one that works for this card... any ideas?
I realize its an older card but its all i have rite now and would like to make it work

 

[Lister]

http://www.vcdhelp.com/capturecards.php?CaptureCardRead=CyberTainment CyberMail AV&Search=Search

quote from here by herbert i think

JHebert reported October 21 2001 that:
Compatibility: Win95? Win98? Win2K? WinXP? NT4? MAC? Linux? - Rated: 9 of 10.

--------------------------------------------------------------------------------

This has to be the best value in a BT878 capture
card. I got it for $15 at ComputerGeeks including
software and drivers. The capture quality is at least
as good as other BT8x8 cards like WinTV or
Pinnacle etc. The included drivers worked OK in
Win98 but were limited to 352x240 at 29.97fps. I
downloaded a newer set of VFW drivers from
Askey that are compatible with the CyberMail card.
The link is
http://www.askey.com/html/driver1.html#TV and the
filename is tv424.zip . With these drivers I can now
capture 640x480 or 720x480 at 29.97fps with no
frames dropped using either Huffyuv or PicVideo
MJPEG (Q19).
There is also a "tweaked" universal WDM driver for
BT878 cards in WinME, Win2k, and WinXP that is
compatible with the Cyber card. It is available at
http://www.iulab.com .
My system is a P3 733 with 256MB RAM on a Tyan
S1854 Trinity 400 with VIA 133A chipset and a
single 60GB 7200rpm Ultra66 hard drive.

 

[Johnny™]

thanks for the nfo.... the driver file has been removed from the first link u listed....... or at least i never seen it....but i downloaded the second from iulab and found the tv424.zip from
h--p://www.comimpex.cz/support/HARDWARE/TV/askeyTV/ i will post results after i install the card and see which driver works

 

[Johnny™]

the tweaked version from iulab.com seems to work altho its not a signed driver for XP.. so far no yellow ?'s or !'s in device manager and evrything says device is working properly....altho i did have to enter the driver for each device on the card one at a time, including the codecs......so far all appears to be fine but i will know more when i get an s video adapter and connect my camera