clonecd problem help please

[flyby2001]

Hello all hope you are all ok

anyway my problem is (although it's not a true problem) that when i do a "backup" of any cd "on-the-fly" using clonecd it starts off fine then about 3% all my buffers empty and stay like that until the end of the "backup" procedure is complete. although the "backups" seem to be fine this just causes me a little concern. Have i got a system problem???? see below for my specs..

cheers all


flyby2001 out......

athlon 1800 xp with cool master fan (rated 2.2 gig athlon)
2 x 40 gig hd both masters
1 x 40x lite-on cdrw drive - slave ide 1 (buffer under run enabled)
1 x 40x plextor cdrw drive - slave ide 2(buffer under run enabled)
nivada 32 meg agp tnt2 video card
real magic dvd de-coding card
ecs k7s5a main board
512mb ddr 2100 ram


cheers once again folks hope you can help me out here.

 

[flyby2001]

cheers pokopiko

Cheers m8

but I only copy on-the-fly at 12 speed so surley my system with this spec should be able to handle this????


flyby2001 out........

 

[flyby2001]

cheers once again pokopiko

I have often thought about using a pci ide controller maybe it is worth looking into..thanks for the advice as i say the backups that i burn are usally vcd (well i only do audio and vcd on the fly)and so far 99% of the backups i've done have been sound.(other 1% was due to dodgey media)

Your help is much apprieciated m8

cheers


flyby2001 out.......

anyone got a link to a good supplier of pci ide controllers ...must be a uk site..i seem to have tried most of the commerical sitez with no luck.

 

[flyby2001]

cheers guys

Thanks for the advice joripe.

a bit more messing about but should work ok.

i've just check the pci controller cards out £40-£50 (uk pounds) so maybe i'll waiting till funds are back up before the investment but what i can see there worth there wieght in gold so a definate investment.


cheers folks


flyby2001 out......