Can't burn anything

I

Iain Phillips

New member
Hey there chaps.

I'm having huge problems burning anything using any burning software on windows XP home. My drive is split and I have XP pro on the other half and I have no burning probs whatsoever.

It must be a settings prob or somthing but I can't work it out
Here is the error log

Hope you can help. Cheers!!



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 25/06/2002 15:34:54
Nero Version: 5.5.9.24 (Nero Express)
Recorder: <ARTEC WRR-52Z> Version: 1.15 - HA 1 TA 0 - 5.5.9.24
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DV-5800B> Version: G9H3 - HA 0 TA 1 - 5.5.9.24
Adapter driver: <nvidesm> HA 0
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 VA4O nvidesm Port 0 ID 0 DMA: ?
CdRomPeripheral : ARTEC WRR-52Z 1.15 nvidesm Port 0 ID 0 DMA: ?
CdRomPeripheral : _NEC DV-5800B G9H3 nvidesm Port 0 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 48234496 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 138MB (141676kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

10.11.2003
CD Image
22:21:32 #1 Phase 75 File dlgbrnst.cpp, Line 1574
JustLink activated

22:21:32 #2 Text 0 File Reader.cpp, Line 115
Reader running

22:21:32 #3 Text 0 File Writer.cpp, Line 123
Writer ARTEC WRR-52Z running

22:21:32 #4 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.

DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=676945920
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=73:25.15 ( 330390)

22:21:32 #5 Text 0 File Burncd.cpp, Line 3604
Turn on Disc-At-Once, using CD-R/RW media

22:21:32 #6 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CD-ROM Mode1)
2 indices, index0 (150) provided
original CD pos #0 + 330390 (330390) = #330390/73:25.15
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------

22:21:32 #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 336224 (74:44.74)
Last address to be written: 330389 (73:27.14)

22:21:32 #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE

22:21:32 #9 Text 0 File DlgWaitCD.cpp, Line 1419
Recorder: ARTEC WRR-52Z;
CDR code: 00 97 31 01; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1F 01 (LI 97:31.01), 3: 4A 2D 00 (LO 74:45.00)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

22:21:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder ARTEC WRR-52Z for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 676945920

22:21:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CD-ROM Mode1)
2 indices, index0 (150) provided
original CD pos #0 + 330390 (330390) = #330390/73:25.15
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 330390 blocks [ARTEC WRR-52Z ]
--------------------------------------------------------------

22:21:32 #12 Phase 24 File dlgbrnst.cpp, Line 1574
Caching of files started

22:21:32 #13 Phase 25 File dlgbrnst.cpp, Line 1574
Caching of files completed

22:21:32 #14 Phase 36 File dlgbrnst.cpp, Line 1574
Burn process started at 32x (4,800 KB/s)

22:21:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1952
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

22:21:32 #16 Text 0 File Mmc.cpp, Line 12522
StartDAO : CD-Text - Off

22:21:32 #17 Text 0 File Mmc.cpp, Line 17129
Set BUFE: JustLink -> ON , JustSpeed : ON

22:21:32 #18 Text 0 File Mmc.cpp, Line 12780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 49 1b 0f

22:21:37 #19 SCSI -500 File Cdrdrv.cpp, Line 1189
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

22:21:43 #20 SCSI -1066 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x023B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

22:21:43 #21 MMC -1066 File Writer.cpp, Line 331
Invalid field in command

22:21:43 #22 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

22:21:43 #23 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

22:21:43 #24 Phase 38 File dlgbrnst.cpp, Line 1574
Burn process failed at 32x (4,800 KB/s)

22:21:43 #25 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 17/01/2003 04:30:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
Duracell

Duracell

1
Hi Iain Welcome to our forum! :cool:

your ASPI/driver status looks OK;

Did it ever work in XP Home?
Did you try disabling XP's native burning engine (MMC > services > IMAPI)?

Are you using the same CD-R media like ever? don't use the Ritec crap, they are good in DVD(R) but worst in CD(R);
try to burn in slower speed (16x);
What burning applications do you have/had installed in XP Home? Any packet writers? competed burning engines may cause such problems too;


--------------------------------
we would be glad, if you like to introduce yourself here: http://www.dvdrbase.com/forumdisplay.php?f=141

and please read our forum rules : http://www.dvdrbase.com/forumdisplay.php?f=58
--------------------------------​
Greetings from
Duracell
 
I

Iain Phillips

New member
It used to work with everything that I am using now.
I have nero, Alcohol120 adn alcoholer.
I also have iso buster

I'm gonna ahve a go at uninstalling alcohol and alcoholer to see if that works
 
Duracell

Duracell

1
some questions are still unanswered ;):

Duracell said:
Did you try disabling XP's native burning engine (MMC > services > IMAPI)?
Are you using the same CD-R media like ever? don't use the Ritec crap, they are good in DVD(R) but worst in CD(R);
try to burn in slower speed (16x);
Click to expand...
 
S

scarecrow

1
Are you logged in as a user?
The last line of the Nero log suggests that the user did not have sufficient privileges to burn.
Log in as admin, or do a fresh installation for all users, and not just the logged one. Or finally find the above key ( HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs ) and change the value from 0 to 1.
 
You must log in or register to reply here.
Top