Burned five coasters

J

johnson636

New member
I've just installed my new optorite DD1203. I've tried to burn four discs all coasters. I kept my sony 500a installed and tried a burn with it, also a coaster. Nero 6 gave me a power callibration error on every burn. Below is a log of th proccess. Oh, It reads just fine, got up to 11x, just can't right.


xxxxxx <- I've removed your Nero Serial Number - ChickenMan

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.11 (Nero Express)
Recorder: <OPTORITE DVD RW DD1203> Version: 100E - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <OPTORITE DVD RW DD1203 >Version: 100E - HA 1 TA 0 - 6.0.0.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : OPTORITE DVD RW DD1203 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261424kB)
Free physical memory: 126MB (129508kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.6.2004
===== Disc-Copy over image - 1st step : Copy to image ...

7:59:17 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

7:59:17 PM #2 Text 0 File Writer.cpp, Line 127
Writer Image Recorder running

7:59:19 PM #3 Text 0 File DVDCopy.cpp, Line 173
Max -1 tracks of 1 allowed to copy
1: 0 - 865264 = 865264, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

7:59:19 PM #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

7:59:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2147483646 (477218:35.21)
Last address to be written: 865263 (192:16.63)

7:59:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

7:59:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

7:59:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 865264 (865264) = #865264/192:16.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 865264 blocks [ Image Recorder ]
--------------------------------------------------------------

7:59:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1772367872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
865264 | lead-out | 1 | 0x00 | 0x41

7:59:19 PM #10 Phase 120 File dlgbrnst.cpp, Line 1843
Creating the image for burning

7:59:19 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:02:39 PM #12 Text 0 File WriterStatus.cpp, Line 113
< Image Recorder > start writing Lead-Out at LBA 865264 (D33F0h), lenght 0 blocks

8:02:39 PM #13 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

8:02:40 PM #14 Phase 121 File dlgbrnst.cpp, Line 1843
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

8:02:54 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

8:02:54 PM #2 Text 0 File Writer.cpp, Line 127
Writer OPTORITE DVD RW DD1203 running

8:02:54 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1772367872
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=192:16.64 ( 865264)
MTYP: Mediumtype = DVD (old format) (0x1C)

8:02:54 PM #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

8:03:21 PM #5 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 865263 (192:16.63)

8:03:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

8:03:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: OPTORITE DVD RW DD1203, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

8:03:21 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 865264 (865264) = #865264/192:16.64
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 865264 blocks [OPTORITE DVD RW DD1203 ]
--------------------------------------------------------------

8:03:21 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [OPTORITE DVD RW DD1203 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1772367872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
865264 | lead-out | 1 | 0x00 | 0x41

8:03:21 PM #10 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (5,520 KB/s)

8:03:21 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:03:21 PM #12 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 5:37,332 (337332ms) -> OK

8:03:21 PM #13 Text 0 File DVDR.cpp, Line 1485
Recording mode: Sequential Recording Mode

8:03:21 PM #14 Text 0 File Mmc.cpp, Line 18878
Set BUFE: ExacLink -> ON

8:03:21 PM #15 Text 0 File DVDR.cpp, Line 1600
Start write address at LBA 0
DVD high compatibility mode: Yes

8:03:21 PM #16 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:04:24 PM #17 SCSI -1106 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x058F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

8:04:24 PM #18 CDR -1106 File Writer.cpp, Line 335
Power calibration error

8:04:24 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

8:04:25 PM #20 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

8:04:25 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

8:04:25 PM #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

8:04:25 PM #23 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 3:24:25 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
ChickenMan

ChickenMan

1
Power calibration errors is due to crappy media or trying to burn to high. I see your using RITEKG - 05, is this +R or -R media and I'm assuming your trying to burn at 8x. Have you tried these at 6x or 4x ?
 
D

DVDMan007

Member
chickenman is right...but run your disc through dvddecrypter...if it comes up with an error...it wont be the disc or your media or your speed...your disc will be fooked and i doubt u cud make a backup of it
 
S

scarecrow

1
You have set the Optorite as master and the Sony as slave on the same IDE channel- this can cause issues with certain configurations. Try replacing your IDE cable with an old, 40-wire one (still good enough for achieving UDMA-2 transfer mode), or disconnecting the Sony completely.
Also, updating your Nero version wouldn't harm- your version uses a generic MMC driver, obviously due to the lack of a vendor-specific one. Sometimes the generic-MMC driver doesn't work that well- not only on Nero, but other burning programs as well.
 
Last edited:
You must log in or register to reply here.
Top