Buring problems with 105

S

Sn00p

New member
Hi,
first of all id like to say hello to everyone, this is my first post on the forum.

I have a pioneer 105, it is 8 months old.
I have never updated the firmware, it is version 1.33

My PC spec is -

Athlon 2500
512 ddr ram
120 gb + 80 gb hard drives

My problem is this -

I have 2 different programmes for burning,

stomp record now max version 4.50
Nero 5 version 5.5.10.35

When i burn with stomp its works every time if I create a globel image first and burn it on 2x, if i try 4x it fails everytime.
My problem with the above is it takes ages.

If i try the wizard to do a straight copy it fails everytime.
Copying cds works every time.

Also when I use stomp my pc goes nuts (dont know how else to explain it)
If say I try to open a windown or click on an already opened window to display it it takes like over a minute to bring it up and my pc sounds like its choking.


If I use Nero, i have problems aswell.

I can do straight copys with it but it will only work say 1 in every 10 i try.
If i try to create an image first and the burn to disc it fails every time.

Can any1 suggest anything as to why this is happining ?
apart from taking a baseball bat to my 105 :D
 
PC-GUY

PC-GUY

1
Sn00p said:
Hi,
were do i find the log file m8 ?

cheers
Click to expand...
Look in your nero folder or do a search for "*.log". It could be in C:\Program Files\Ahead\Nero then in that folder NeroHistory.log
 
S

Sn00p

New member
Ok thx.
Here is Nero history

blastsoft
blastsoft
XXX No SERIAL XXXX :)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 326MB (334836kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:19:18 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:19:18 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:19:18 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:19:18 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:19:19 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2263871 (503:04.71)

21:19:19 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:19:19 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:19:19 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 341749760

21:19:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263872 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:19:19 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:19:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:19:19 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:19:19 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:19:19 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:19:19 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:19:19 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:19:32 #17 Text 0 File Writer.cpp, Line 316
21:19:32.843 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:20:27 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x023A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:20:27 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:20:27 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:20:27 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:20:28 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:20:28 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 308MB (316240kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:20:52 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:20:52 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:20:52 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:20:52 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:20:56 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2263871 (503:04.71)

21:20:56 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:20:56 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:20:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 341749760

21:20:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263872 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:20:56 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:20:56 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:20:56 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:20:56 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:20:56 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:20:56 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:20:56 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:21:09 #17 Text 0 File Writer.cpp, Line 316
21:21:09.984 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:22:02 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:22:02 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:22:02 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:22:02 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:22:02 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:22:02 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 272MB (278988kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:26:42 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:26:42 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:26:42 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:26:42 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:26:43 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2263871 (503:04.71)

21:26:43 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:26:43 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:26:43 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 341749760

21:26:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263872 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:26:43 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:26:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:26:43 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:26:43 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:26:43 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:26:43 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:26:43 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:26:57 #17 Text 0 File Writer.cpp, Line 316
21:26:57.359 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:27:51 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x023A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:27:51 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:27:51 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:27:51 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:27:51 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:27:51 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 256MB (263052kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:28:27 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:28:27 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:28:27 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:28:27 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:28:29 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2263871 (503:04.71)

21:28:29 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:28:29 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:28:29 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 341749760

21:28:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2263872 (2263872) = #2263872/503:4.72
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263872 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:28:29 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:28:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:28:29 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:28:29 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:28:29 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:28:29 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:28:29 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:28:42 #17 Text 0 File Writer.cpp, Line 316
21:28:42.828 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:29:36 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:29:36 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:29:36 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:29:36 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:29:37 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:29:37 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 258MB (265120kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:30:13 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:30:13 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:30:13 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:30:13 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:30:15 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2227103 (494:54.53)

21:30:15 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:30:15 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:30:15 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 266448896

21:30:15 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227104 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:30:15 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:30:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:30:15 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:30:15 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:30:15 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:30:15 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:30:15 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:30:28 #17 Text 0 File Writer.cpp, Line 316
21:30:28.562 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:31:22 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:31:22 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:31:22 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:31:22 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:31:22 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:31:22 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 259MB (265988kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
CD Copy
21:31:57 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:31:57 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:31:57 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:31:57 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:31:59 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2227103 (494:54.53)

21:31:59 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:31:59 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:31:59 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 266448896

21:31:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227104 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:31:59 #10 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 4x (5,520 KB/s)

21:31:59 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:31:59 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:31:59 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:31:59 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:31:59 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:31:59 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:32:03 #17 SCSI -1024 File Cdrdrv.cpp, Line 1215
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06484000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x28 0x00 0x00 0x00 0x26 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03

21:32:03 #18 Text 0 File DVDCopy.cpp, Line 179
DVDCopy: Start of Dirty-Read at LBA9792

21:32:03 #19 Text 0 File Writer.cpp, Line 316
21:32:03.640 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:32:27 #20 Text 0 File Writer.cpp, Line 316
21:32:27.390 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:45:46 #21 Text 0 File WriterStatus.cpp, Line 115


start writing Lead-Out at LBA 2227104 (21FBA0h), lenght 0 blocks

21:45:46 #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:45:56 #23 Phase 33 File dlgbrnst.cpp, Line 1655
Simulation completed successfully at 4x (5,520 KB/s)

21:46:06 #24 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:46:06 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:46:06 #26 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:46:06 #27 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:46:06 #28 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:46:06 #29 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:46:06 #30 Text 0 File Writer.cpp, Line 316
21:46:06.640 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:47:00 #31 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:47:00 #32 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:47:00 #33 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:47:00 #34 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:47:00 #35 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:47:00 #36 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 369MB (378788kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

1.6.2004
===== Disc-Copy over image - 1st step : Copy to image ...

21:49:23 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:49:23 #2 Text 0 File Writer.cpp, Line 125
Writer Image Recorder running

21:49:23 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:49:23 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

21:49:23 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2147483646 (477218:35.21)
Last address to be written: 2227103 (494:54.53)

21:49:23 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:49:23 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

21:49:23 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder Image Recorder for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 266448896

21:49:23 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227104 blocks [ Image Recorder ]
--------------------------------------------------------------

21:49:23 #10 Phase 120 File dlgbrnst.cpp, Line 1655
Creating the image for burning

21:49:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

21:49:23 #12 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

21:49:47 #13 SCSI -1024 File Cdrdrv.cpp, Line 1215
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05031000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x28 0x00 0x00 0x00 0xF6 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03

21:49:47 #14 Text 0 File DVDCopy.cpp, Line 179
DVDCopy: Start of Dirty-Read at LBA63040

21:51:55 #15 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2227104 (21FBA0h), lenght 0 blocks

21:51:55 #16 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:51:55 #17 Phase 121 File dlgbrnst.cpp, Line 1655
Creating Image completed successfully

21:51:56 #18 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated



===== Disc-Copy over image - 2nd step : Burn the image ...

21:52:12 #1 Text 0 File Reader.cpp, Line 115
Reader running

21:52:12 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

21:52:13 #3 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.

DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=266448896
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=494:54.54 ( 2227104)

21:52:13 #4 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

21:52:13 #5 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------

21:52:14 #6 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2227103 (494:54.53)

21:52:14 #7 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

21:52:14 #8 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

21:52:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 266448896

21:52:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original CD pos #0 + 2227104 (2227104) = #2227104/494:54.54
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227104 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

21:52:14 #11 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

21:52:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

21:52:14 #13 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

21:52:14 #14 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

21:52:14 #15 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

21:52:14 #16 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:52:17 #17 Text 0 File Writer.cpp, Line 316
21:52:17.343 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

21:53:13 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x023E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

21:53:13 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

21:53:13 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

21:53:14 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

21:53:14 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

21:53:14 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxxxx</atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi><atapi><asus dvd-e616p=""><atapi>

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 185MB (190156kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

2.6.2004
CD Copy
20:29:56 #1 Text 0 File Reader.cpp, Line 115
Reader running

20:29:56 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

20:29:56 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

20:29:56 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2164640 (2164640) = #2164640/481:1.65
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

20:29:57 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2164639 (481:01.64)

20:29:57 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

20:29:57 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

20:29:57 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 138522624

20:29:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2164640 (2164640) = #2164640/481:1.65
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2164640 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

20:29:57 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

20:29:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

20:29:57 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

20:29:57 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

20:29:57 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

20:29:57 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:29:57 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

20:30:11 #17 Text 0 File Writer.cpp, Line 316
20:30:11.062 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20:31:16 #18 Text 0 File Writer.cpp, Line 316
20:31:16.687 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20:31:17 #19 Text 0 File Writer.cpp, Line 316
20:31:17.250 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20:44:13 #20 Text 0 File WriterStatus.cpp, Line 115


start writing Lead-Out at LBA 2164640 (2107A0h), lenght 0 blocks

20:44:13 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

20:44:51 #22 Phase 37 File dlgbrnst.cpp, Line 1655
Burn process completed successfully at 4x (5,520 KB/s)

20:44:51 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 183MB (188368kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

2.6.2004
CD Copy
20:50:12 #1 Text 0 File Reader.cpp, Line 115
Reader running

20:50:12 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

20:50:12 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

20:50:12 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2062160 (2062160) = #2062160/458:15.35
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

20:50:13 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2062159 (458:15.34)

20:50:13 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

20:50:13 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

20:50:13 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -71356416

20:50:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2062160 (2062160) = #2062160/458:15.35
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2062160 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

20:50:13 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

20:50:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

20:50:13 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

20:50:13 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

20:50:13 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

20:50:13 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:50:13 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

20:50:14 #17 SCSI -1024 File Cdrdrv.cpp, Line 1215
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x050DC000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x28 0x00 0x00 0x00 0x01 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03

20:50:14 #18 Text 0 File DVDCopy.cpp, Line 179
DVDCopy: Start of Dirty-Read at LBA320

20:50:14 #19 Text 0 File Writer.cpp, Line 316
20:50:14.312 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20:51:07 #20 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

20:51:07 #21 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

20:51:08 #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

20:51:08 #23 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

20:51:08 #24 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

20:51:08 #25 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
blastsoft
blastsoft
xxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 23:37:36
Nero Version: 5.5.10.35
Recorder:

Version: 1.33 - HA 1 TA 0 - 5.5.10.35
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <asus dvd-e616p=""> Version: 1.04 - HA 1 TA 1 - 5.5.10.35
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380012ACE atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 184MB (188512kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

2.6.2004
CD Copy
20:51:49 #1 Text 0 File Reader.cpp, Line 115
Reader running

20:51:49 #2 Text 0 File Writer.cpp, Line 125
Writer PIONEER DVD-RW DVR-105 running

20:51:49 #3 Text 0 File Burncd.cpp, Line 3737
Turn on Disc-At-Once, using DVD media

20:51:49 #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2062160 (2062160) = #2062160/458:15.35
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

20:51:50 #5 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2062159 (458:15.34)

20:51:50 #6 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE

20:51:50 #7 Text 0 File DlgWaitCD.cpp, Line 1680
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

20:51:50 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -71356416

20:51:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2062160 (2062160) = #2062160/458:15.35
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2062160 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

20:51:50 #10 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

20:51:50 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0

20:51:50 #12 Text 0 File DVDR.cpp, Line 1425
Recording mode: Sequential Recording Mode

20:51:50 #13 Text 0 File Mmc.cpp, Line 18183
Set BUFE: supported -> ON

20:51:50 #14 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

20:51:50 #15 Text 0 File Cdrdrv.cpp, Line 7892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:51:50 #16 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy

20:52:04 #17 Text 0 File Writer.cpp, Line 316
20:52:04.203 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 11msec)

20:52:58 #18 SCSI -1106 File Cdrdrv.cpp, Line 1419
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

20:52:58 #19 DVDR -1106 File Writer.cpp, Line 333
Power calibration error

20:52:58 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

20:52:58 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

20:52:58 #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

20:52:58 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 03:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 09:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======</atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi></atapi></asus></atapi>
 
Last edited by a moderator:
PC-GUY

PC-GUY

1
You can try install aspis but your getting Power calibration errors and thats not good. I'm sorry to say but from what I understand Power calibration error is usually a sign of the drives on the way out.
 
You must log in or register to reply here.
Top