RASTABT
1
13 May 2004
ATITool is an overclocking utility designed for ATI video cards.
Design target is to write a light-weight application for the enthusiast - so no questionable registry tweaks. Sorry.
Main Features
* No limits overclocking.
* Finding maximum core and memory overclock by rendering into a Direct3D window and scanning the output for visual artifacts.
* Artifact scanning mode for non-ATI cards - use together with a 3rd party overclocking utility.
* Loading a predefined clock profile on Application/Windows startup.
* Hotkeys that can be used any time to load clocks from a profile. 3D application detection (Direct3D 8, Direct3D 9, OpenGL) to overclock your video card only when required.
ATITool will only work on Windows 2000/XP/2003
Version 0.0.20
* Position of the main window is saved now
* Rendering in a remote desktop session is now disabled
* Added info box: "ATITool will not work with TemporalAA enabled"
* Added "dump bios" function - please report back with which cards this is not working
* Sliders now default to 0.4x to 1.6x of frequency
* Hotkey in profile properties shows "none" if no hotkey is set
* Radeon 9100 IGP is no longer incorrectly detected as supported chip - this fixes a bluescreen/reboot issue, thanks Valar
* Fixed sys driver problem where bios address would be incorrectly detected - this fixes a bluescreen/reboot issue, thanks Gaston
* Made the background a bit less red on non-ps 2.0 cards.
* Added support for R420 overclocking
* Fixed 'load on windows startup' not working when your installation path had a space in it.
* Fixed disappearing entry in taskbar when settings are active.
* Fixed small tooltip typo.
* Changed code to reduce big frequency jumps (which sometimes results in crashes), max. change is 16 Mhz in 10 ms.
* Changing AA/AF settings now resets display adapter.
* Added temperature monitoring for 9600XT, 9800XT, X800
* Fixed frequencies not switching back when leaving 3D mode. A quick fix for this is in earlier versions is to enable 'play sound when leaving 3d mode'.
*# Fixed buggy characters in comment of auto-created default profile.
# Code cleanup
http://atitool.ocfaq.com/
ATITool is an overclocking utility designed for ATI video cards.
Design target is to write a light-weight application for the enthusiast - so no questionable registry tweaks. Sorry.
Main Features
* No limits overclocking.
* Finding maximum core and memory overclock by rendering into a Direct3D window and scanning the output for visual artifacts.
* Artifact scanning mode for non-ATI cards - use together with a 3rd party overclocking utility.
* Loading a predefined clock profile on Application/Windows startup.
* Hotkeys that can be used any time to load clocks from a profile. 3D application detection (Direct3D 8, Direct3D 9, OpenGL) to overclock your video card only when required.
ATITool will only work on Windows 2000/XP/2003
Version 0.0.20
* Position of the main window is saved now
* Rendering in a remote desktop session is now disabled
* Added info box: "ATITool will not work with TemporalAA enabled"
* Added "dump bios" function - please report back with which cards this is not working
* Sliders now default to 0.4x to 1.6x of frequency
* Hotkey in profile properties shows "none" if no hotkey is set
* Radeon 9100 IGP is no longer incorrectly detected as supported chip - this fixes a bluescreen/reboot issue, thanks Valar
* Fixed sys driver problem where bios address would be incorrectly detected - this fixes a bluescreen/reboot issue, thanks Gaston
* Made the background a bit less red on non-ps 2.0 cards.
* Added support for R420 overclocking
* Fixed 'load on windows startup' not working when your installation path had a space in it.
* Fixed disappearing entry in taskbar when settings are active.
* Fixed small tooltip typo.
* Changed code to reduce big frequency jumps (which sometimes results in crashes), max. change is 16 Mhz in 10 ms.
* Changing AA/AF settings now resets display adapter.
* Added temperature monitoring for 9600XT, 9800XT, X800
* Fixed frequencies not switching back when leaving 3D mode. A quick fix for this is in earlier versions is to enable 'play sound when leaving 3d mode'.
*# Fixed buggy characters in comment of auto-created default profile.
# Code cleanup
http://atitool.ocfaq.com/