problem the filmmachine audio

[jaenke]

als ik een film bewerk met de filmmachine blijft hij altijd hangen bij
de 2e pass van de audio .
BeSweet v1.5b23 by DSPguru.
--------------------------
Using hip.dll v1.19 by Myers Carpenter <myers@users.sf.net>
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru
(shibatch.sourceforge.net).
Using AC3enc.dll v1.20 (Feb 18 2004) by Fabrice Bellard
(http://ffmpeg.org).

Logging start : 12/09/04 , 19:33:24.

BeSweet.dll -core( -input mpainput -output
D:\Films\TFM_Encoded_Audio.ac3 -logfile
D:\Films\TFM_Encoded_Audio.log ) -azid( -L -3db -c normal -s surround2
-g max ) -ota( -fs 48000 ) -shibatch( --rate 48000 ) -ac3enc( -b 224 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : mpainput
[00:00:00:000] | Output: D:\Films\TFM_Encoded_Audio.ac3
[00:00:00:000] | Floating-Point Process: No
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +------- AC3ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | AC3 bitrate : 224
[00:00:00:000] | Channels Mode : 2.0
[00:00:00:000] | Error Protection: Yes
[00:00:00:000] +---------------------
[00:00:00:024] Stream error : Sync found after 58 bytes
[02:19:29:688] Conversion Completed !
[00:01:27:000] <-- Transcoding Duration

Logging ends : 12/09/04 , 19:34:51.


BeSweet v1.5b23 by DSPguru.
--------------------------
Using hip.dll v1.19 by Myers Carpenter <myers@users.sf.net>
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru
(shibatch.sourceforge.net).
Using AC3enc.dll v1.20 (Feb 18 2004) by Fabrice Bellard
(http://ffmpeg.org).

Logging start : 12/09/04 , 19:34:51.

BeSweet.dll -core( -input mpainput -output
D:\Films\TFM_Encoded_Audio.ac3 -logfile
D:\Films\TFM_Encoded_Audio.log ) -azid( -L -3db -c normal -s surround2
-g 1,291db ) -ota( -fs 48000 ) -shibatch( --rate 48000 ) -ac3enc( -b
224 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : mpainput
[00:00:00:000] | Output: D:\Films\TFM_Encoded_Audio.ac3
[00:00:00:000] | Floating-Point Process: No
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +------- AC3ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | AC3 bitrate : 224
[00:00:00:000] | Channels Mode : 2.0
[00:00:00:000] | Error Protection: Yes

[SweetHuggers]

Try to post in English, i think you will have a quicker reply then, because not all of the readers are Dutch, but there are some good english speaking helpers out there