Dvdreasy

[MysticE]

Well still can't get thru it without it hanging. Must have most things configured right as I'm getting good results with DVD Rebuilder (ie CCE 2.50 etc.)

Here's a screen shot of where things go bad/stop. Note also what's open in the task bar. Any thoughts?

XP Pro, sp1

[ChickenMan]

Well I re-ran my Picnic at Hanging Rock R1 NTSC with nothing else open and it ran through fine no errors. However, the audio and subtitles are in sync to one another but 45 sec before the movie. There is about 45 sec of no audio intro before the movie starts so I assume thats whats causing the problem. It does however convert fine with no sync issues, movie only, using DVD2SVCD with the same Avisynth & CCE. ReBuilder also has no problems with audio sync either.

[dvdreasy]

Well I re-ran my Picnic at Hanging Rock R1 NTSC with nothing else open and it ran through fine no errors. However, the audio and subtitles are in sync to one another but 45 sec before the movie. There is about 45 sec of no audio intro before the movie starts so I assume thats whats causing the problem. It does however convert fine with no sync issues, movie only, using DVD2SVCD with the same Avisynth & CCE. ReBuilder also has no problems with audio sync either.

Hi ChickenMan,

This is very odd.

I never had this problem and no one report that either. But... also I never had a movie that had an intro with no audio.

Could you please mail me the IFO file ?

Thanks

[ChickenMan]

The Original IFO in the IFO folder is attached (zipped). Also the vsettings.txt file reads:

Num. of picture read: 25311
Stream type: MPEG-2 MP@ML CBR
Resolution: 720*480
Aspect ratio: 4:3 Generic
Framerate: 29.97
Nom. bitrate: 7800000 Bit/Sec
VBV buffer size: 112
Constrained param. flag: No
Chroma format: 4:2:0
DCT precision: 9
Pic. structure: Frame
Field topfirst: Yes
DCT type: Field
Quantscale: Nonlinear
Scan type: Alternate
Frame type: Interlaced
Scene change detection: FOUND
Variable GOP pattern: NOT FOUND
Notes:

Hope this helps.

[ajvnet]

Thx for good advices

[dvdreasy]

The Original IFO in the IFO folder is attached (zipped). Also the vsettings.txt file reads:

Num. of picture read: 25311
Stream type: MPEG-2 MP@ML CBR
Resolution: 720*480
Aspect ratio: 4:3 Generic
Framerate: 29.97
Nom. bitrate: 7800000 Bit/Sec
VBV buffer size: 112
Constrained param. flag: No
Chroma format: 4:2:0
DCT precision: 9
Pic. structure: Frame
Field topfirst: Yes
DCT type: Field
Quantscale: Nonlinear
Scan type: Alternate
Frame type: Interlaced
Scene change detection: FOUND
Variable GOP pattern: NOT FOUND
Notes:

Hope this helps.

Hi chikenman,

DVDREasy 0.1.5 has a bug in NTSC movies !

Pulldown is allways executed regardless of the movie Framerate. This is why you had 45 sec of bad sync.

I have almost ready a new release that will run in all versions of windows and only execute pulldown if the movie is NTSC and Framerate is 23.976.

[ChickenMan]

Fantastic, cant wait Thanks.

[the-texan]

Sounds like a perfect solution. Shall give this a try. Thanks. Will test on several DVD this weekend.

[Kilroy]

Is CCE Basic 2.69 compatible with Dvdreasy, or will the program only function with CCE SP 2.5? Since SP is rather cost-prohibitive, the ability to use Basic would be a necessity for me. Thanks.

Kilroy

[dvdreasy]

Is CCE Basic 2.69 compatible with Dvdreasy, or will the program only function with CCE SP 2.5? Since SP is rather cost-prohibitive, the ability to use Basic would be a necessity for me. Thanks.

Kilroy

Hi Kilroy,

For now, DVDREasy only function with CCE SP 2.5.