If you are still using an old abit be6-2 rev1.0 mobo with an onboard highpoint udma66 controller then you will find a raid bios for your mobo here:

f*p://geerynet.d2g.com/Beta/be6-ii/Custom/

After flashing your will have a abit be6-2 with a xu board-firmware and a 368 raid controller firmware.(iwill)

After flashing you will be able to switch to raid0 and raid1 .

I flashed my be6-2 but i couldnīt test the raid function cause i donīt have two equal hdīs.

This fw is only for the brave ...itīs your own risk